This feedback can act as a pause but also as a start point for your loops. Add a FeedbackLooper below this (and after a few feedbacks) and your MMFeedbacks will loop between both More...

Inheritance diagram for MoreMountains.Feedbacks.MMFeedbackLooperStart:

Protected Member Functions
virtual void	Reset ()
	Overrides the default value More...

override void	CustomPlayFeedback (Vector3 position, float feedbacksIntensity=1.0f)
	On play we run our pause More...

Protected Member Functions inherited from MoreMountains.Feedbacks.MMFeedbackPause
virtual IEnumerator	PauseWait ()
	An IEnumerator used to wait for the duration of the pause, on scaled or unscaled time More...

override void	CustomInitialization (GameObject owner)
	On init we cache our wait for seconds More...

override void	CustomPlayFeedback (Vector3 position, float feedbacksIntensity=1.0f)
	On play we trigger our pause More...

virtual IEnumerator	PlayPause ()
	Pause coroutine More...

Protected Member Functions inherited from MoreMountains.Feedbacks.MMFeedback
virtual void	OnEnable ()

virtual IEnumerator	PlayCoroutine (Vector3 position, float feedbacksIntensity=1.0f)
	An internal coroutine delaying the initial play of the feedback More...

virtual void	RegularPlay (Vector3 position, float feedbacksIntensity=1.0f)
	Triggers delaying coroutines if needed More...

virtual IEnumerator	InfinitePlay (Vector3 position, float feedbacksIntensity=1.0f)
	Internal coroutine used for repeated play without end More...

virtual IEnumerator	RepeatedPlay (Vector3 position, float feedbacksIntensity=1.0f)
	Internal coroutine used for repeated play More...

virtual IEnumerator	SequenceCoroutine (Vector3 position, float feedbacksIntensity=1.0f)
	A coroutine used to play this feedback on a sequence More...

virtual float	ApplyDirection (float normalizedTime)
	Returns a new value of the normalized time based on the current play direction of this feedback More...

virtual float	ApplyTimeMultiplier (float duration)
	Applies the host MMFeedbacks' time multiplier to this feedback More...

virtual void	CustomStopFeedback (Vector3 position, float feedbacksIntensity=1.0f)
	This method describes what happens when the feedback gets stopped More...

virtual void	CustomReset ()
	This method describes what happens when the feedback gets reset More...

Properties
override bool	LooperStart `[get]`
	sets the color of this feedback in the inspector More...

override float	FeedbackDuration `[getset]`
	the duration of this feedback is the duration of the pause More...

Properties inherited from MoreMountains.Feedbacks.MMFeedbackPause
override IEnumerator	Pause `[get]`

override float	FeedbackDuration `[getset]`
	the duration of this feedback is the duration of the pause More...

Properties inherited from MoreMountains.Feedbacks.MMFeedback
GameObject	Owner `[getset]`
	the Owner of the feedback, as defined when calling the Initialization method More...

virtual IEnumerator	Pause `[get]`
	set this to true if your feedback should pause the execution of the feedback sequence More...

virtual bool	HoldingPause `[get]`
	if this is true, this feedback will wait until all previous feedbacks have run More...

virtual bool	LooperPause `[get]`
	if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...

virtual bool	ScriptDrivenPause `[getset]`
	if this is true, this feedback will pause and wait until Resume() is called on its parent MMFeedbacks to resume execution More...

virtual float	ScriptDrivenPauseAutoResume `[getset]`
	if this is a positive value, the feedback will auto resume after that duration if it hasn't been resumed via script already More...

virtual bool	LooperStart `[get]`
	if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...

virtual bool	InCooldown `[get]`
	returns true if this feedback is in cooldown at this time (and thus can't play), false otherwise More...

virtual bool	IsPlaying `[getset]`
	if this is true, this feedback is currently playing More...

float	FeedbackTime `[get]`
	the time (or unscaled time) based on the selected Timing settings More...

float	FeedbackDeltaTime `[get]`
	the delta time (or unscaled delta time) based on the selected Timing settings More...

float	TotalDuration `[get]`
	The total duration of this feedback : total = initial delay + duration * (number of repeats + delay between repeats) More...

virtual float	FeedbackStartedAt `[get]`

virtual float	FeedbackDuration `[getset]`

virtual bool	FeedbackPlaying `[get]`
	whether or not this feedback is playing right now More...

virtual bool	NormalPlayDirection `[get]`
	Returns true if this feedback should play normally, or false if it should play in rewind More...

virtual bool	ShouldPlayInThisSequenceDirection `[get]`
	Returns true if this feedback should play in the current parent MMFeedbacks direction, according to its MMFeedbacksDirectionCondition setting More...

virtual float?	FinalNormalizedTime `[get]`
	Returns the t value at which to evaluate a curve at the end of this feedback's play time More...

Additional Inherited Members
Public Member Functions inherited from MoreMountains.Feedbacks.MMFeedback
virtual void	Initialization (GameObject owner)
	Initializes the feedback and its timing related variables More...

virtual void	Play (Vector3 position, float feedbacksIntensity=1.0f)
	Plays the feedback More...

virtual void	Stop (Vector3 position, float feedbacksIntensity=1.0f)
	Stops all feedbacks from playing. Will stop repeating feedbacks, and call custom stop implementations More...

virtual void	ResetFeedback ()
	Calls this feedback's custom reset More...

virtual void	SetSequence (MMSequence newSequence)
	Use this method to change this feedback's sequence at runtime More...

virtual void	SetDelayBetweenRepeats (float delay)
	Use this method to specify a new delay between repeats at runtime More...

virtual void	SetInitialDelay (float delay)
	Use this method to specify a new initial delay at runtime More...

Public Attributes inherited from MoreMountains.Feedbacks.MMFeedbackPause
float	PauseDuration = 1f
	the duration of the pause, in seconds More...

bool	RandomizePauseDuration = false

float	MinPauseDuration = 1f

float	MaxPauseDuration = 3f

bool	RandomizeOnEachPlay = true

bool	ScriptDriven = false
	if this is true, you'll need to call the Resume() method on the host MMFeedbacks for this pause to stop, and the rest of the sequence to play More...

bool	AutoResume = false
	if this is true, a script driven pause will resume after its AutoResumeAfter delay, whether it has been manually resumed or not More...

float	AutoResumeAfter = 0.25f
	the duration after which to auto resume, regardless of manual resume calls beforehand More...

Public Attributes inherited from MoreMountains.Feedbacks.MMFeedback
bool	Active = true
	whether or not this feedback is active More...

string	Label = "MMFeedback"
	the name of this feedback to display in the inspector More...

float	Chance = 100f
	the chance of this feedback happening (in percent : 100 : happens all the time, 0 : never happens, 50 : happens once every two calls, etc) More...

MMFeedbackTiming	Timing
	a number of timing-related values (delay, repeat, etc) More...

bool	DebugActive = false
	whether or not this feedback is in debug mode More...

Static Public Attributes inherited from MoreMountains.Feedbacks.MMFeedbackPause
static bool	FeedbackTypeAuthorized = true
	a static bool used to disable all feedbacks of this type at once More...

Protected Attributes inherited from MoreMountains.Feedbacks.MMFeedback
float	_lastPlayTimestamp = -1f

int	_playsLeft

bool	_initialized = false

Coroutine	_playCoroutine

Coroutine	_infinitePlayCoroutine

Coroutine	_sequenceCoroutine

Coroutine	_repeatedPlayCoroutine

int	_sequenceTrackID = 0

MMFeedbacks	_hostMMFeedbacks

float	_beatInterval

bool	BeatThisFrame = false

int	LastBeatIndex = 0

int	CurrentSequenceIndex = 0

float	LastBeatTimestamp = 0f

bool	_isHostMMFeedbacksNotNull

Detailed Description

This feedback can act as a pause but also as a start point for your loops. Add a FeedbackLooper below this (and after a few feedbacks) and your MMFeedbacks will loop between both

Member Function Documentation

◆ CustomPlayFeedback()

override void MoreMountains.Feedbacks.MMFeedbackLooperStart.CustomPlayFeedback	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedvirtual

On play we run our pause

Parameters

position
feedbacksIntensity

Implements MoreMountains.Feedbacks.MMFeedback.

◆ Reset()

virtual void MoreMountains.Feedbacks.MMFeedbackLooperStart.Reset ( )

protectedvirtual

Overrides the default value

Property Documentation

◆ FeedbackDuration

override float MoreMountains.Feedbacks.MMFeedbackLooperStart.FeedbackDuration

getset

the duration of this feedback is the duration of the pause

◆ LooperStart

override bool MoreMountains.Feedbacks.MMFeedbackLooperStart.LooperStart

get

sets the color of this feedback in the inspector

The documentation for this class was generated from the following file:

Assets/InfiniteRunnerEngine/ThirdParty/MoreMountains/MMFeedbacks/MMFeedbacks/Feedbacks/Legacy/MMFeedbackLooperStart.cs

Protected Member Functions

Properties