This feedback will let you change the color of a target sprite renderer over time, and flip it on X or Y. You can also use it to command one or many MMSpriteRendererShakers. More...

Inheritance diagram for MoreMountains.Feedbacks.MMFeedbackImage:

Public Types
enum	Modes { OverTime , Instant , ShakerEvent }
	sets the inspector color for this feedback More...

Public Attributes
Image	BoundImage
	the Image to affect when playing the feedback More...

Modes	Mode = Modes.OverTime
	whether the feedback should affect the Image instantly or over a period of time More...

float	Duration = 0.2f
	how long the Image should change over time More...

bool	StartsOff = false
	whether or not that Image should be turned off on start More...

int	Channel = 0
	the channel to broadcast on More...

bool	ResetShakerValuesAfterShake = true
	whether or not to reset shaker values after shake More...

bool	ResetTargetValuesAfterShake = true
	whether or not to reset the target's values after shake More...

bool	UseRange = false
	whether or not to broadcast a range to only affect certain shakers More...

float	EventRange = 100f
	the range of the event, in units More...

Transform	EventOriginTransform
	the transform to use to broadcast the event as origin point More...

bool	AllowAdditivePlays = false
	if this is true, calling that feedback will trigger it, even if it's in progress. If it's false, it'll prevent any new Play until the current one is over More...

bool	ModifyColor = true
	whether or not to modify the color of the image More...

Gradient	ColorOverTime
	the colors to apply to the Image over time More...

Color	InstantColor
	the color to move to in instant mode More...

Public Attributes inherited from MoreMountains.Feedbacks.MMFeedback
bool	Active = true
	whether or not this feedback is active More...

string	Label = "MMFeedback"
	the name of this feedback to display in the inspector More...

float	Chance = 100f
	the chance of this feedback happening (in percent : 100 : happens all the time, 0 : never happens, 50 : happens once every two calls, etc) More...

MMFeedbackTiming	Timing
	a number of timing-related values (delay, repeat, etc) More...

bool	DebugActive = false
	whether or not this feedback is in debug mode More...

Static Public Attributes
static bool	FeedbackTypeAuthorized = true
	a static bool used to disable all feedbacks of this type at once More...

Protected Member Functions
override void	CustomInitialization (GameObject owner)
	On init we turn the Image off if needed More...

override void	CustomPlayFeedback (Vector3 position, float feedbacksIntensity=1.0f)
	On Play we turn our Image on and start an over time coroutine if needed More...

virtual IEnumerator	ImageSequence ()
	This coroutine will modify the values on the Image More...

virtual void	SetImageValues (float time)
	Sets the various values on the sprite renderer on a specified time (between 0 and 1) More...

override void	CustomStopFeedback (Vector3 position, float feedbacksIntensity=1)
	Turns the sprite renderer off on stop More...

virtual void	Turn (bool status)
	Turns the sprite renderer on or off More...

Protected Member Functions inherited from MoreMountains.Feedbacks.MMFeedback
virtual void	OnEnable ()

virtual IEnumerator	PlayCoroutine (Vector3 position, float feedbacksIntensity=1.0f)
	An internal coroutine delaying the initial play of the feedback More...

virtual void	RegularPlay (Vector3 position, float feedbacksIntensity=1.0f)
	Triggers delaying coroutines if needed More...

virtual IEnumerator	InfinitePlay (Vector3 position, float feedbacksIntensity=1.0f)
	Internal coroutine used for repeated play without end More...

virtual IEnumerator	RepeatedPlay (Vector3 position, float feedbacksIntensity=1.0f)
	Internal coroutine used for repeated play More...

virtual IEnumerator	SequenceCoroutine (Vector3 position, float feedbacksIntensity=1.0f)
	A coroutine used to play this feedback on a sequence More...

virtual float	ApplyDirection (float normalizedTime)
	Returns a new value of the normalized time based on the current play direction of this feedback More...

virtual float	ApplyTimeMultiplier (float duration)
	Applies the host MMFeedbacks' time multiplier to this feedback More...

virtual void	CustomReset ()
	This method describes what happens when the feedback gets reset More...

Protected Attributes
Coroutine	_coroutine

Protected Attributes inherited from MoreMountains.Feedbacks.MMFeedback
float	_lastPlayTimestamp = -1f

int	_playsLeft

bool	_initialized = false

Coroutine	_playCoroutine

Coroutine	_infinitePlayCoroutine

Coroutine	_sequenceCoroutine

Coroutine	_repeatedPlayCoroutine

int	_sequenceTrackID = 0

MMFeedbacks	_hostMMFeedbacks

float	_beatInterval

bool	BeatThisFrame = false

int	LastBeatIndex = 0

int	CurrentSequenceIndex = 0

float	LastBeatTimestamp = 0f

bool	_isHostMMFeedbacksNotNull

Properties
override float?	FeedbackDuration `[getset]`
	the duration of this feedback is the duration of the Image, or 0 if instant More...

Properties inherited from MoreMountains.Feedbacks.MMFeedback
GameObject	Owner `[getset]`
	the Owner of the feedback, as defined when calling the Initialization method More...

virtual IEnumerator	Pause `[get]`
	set this to true if your feedback should pause the execution of the feedback sequence More...

virtual bool	HoldingPause `[get]`
	if this is true, this feedback will wait until all previous feedbacks have run More...

virtual bool	LooperPause `[get]`
	if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...

virtual bool	ScriptDrivenPause `[getset]`
	if this is true, this feedback will pause and wait until Resume() is called on its parent MMFeedbacks to resume execution More...

virtual float	ScriptDrivenPauseAutoResume `[getset]`
	if this is a positive value, the feedback will auto resume after that duration if it hasn't been resumed via script already More...

virtual bool	LooperStart `[get]`
	if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...

virtual bool	InCooldown `[get]`
	returns true if this feedback is in cooldown at this time (and thus can't play), false otherwise More...

virtual bool	IsPlaying `[getset]`
	if this is true, this feedback is currently playing More...

float	FeedbackTime `[get]`
	the time (or unscaled time) based on the selected Timing settings More...

float	FeedbackDeltaTime `[get]`
	the delta time (or unscaled delta time) based on the selected Timing settings More...

float	TotalDuration `[get]`
	The total duration of this feedback : total = initial delay + duration * (number of repeats + delay between repeats) More...

virtual float	FeedbackStartedAt `[get]`

virtual float	FeedbackDuration `[getset]`

virtual bool	FeedbackPlaying `[get]`
	whether or not this feedback is playing right now More...

virtual bool	NormalPlayDirection `[get]`
	Returns true if this feedback should play normally, or false if it should play in rewind More...

virtual bool	ShouldPlayInThisSequenceDirection `[get]`
	Returns true if this feedback should play in the current parent MMFeedbacks direction, according to its MMFeedbacksDirectionCondition setting More...

virtual float?	FinalNormalizedTime `[get]`
	Returns the t value at which to evaluate a curve at the end of this feedback's play time More...

Additional Inherited Members
Public Member Functions inherited from MoreMountains.Feedbacks.MMFeedback
virtual void	Initialization (GameObject owner)
	Initializes the feedback and its timing related variables More...

virtual void	Play (Vector3 position, float feedbacksIntensity=1.0f)
	Plays the feedback More...

virtual void	Stop (Vector3 position, float feedbacksIntensity=1.0f)
	Stops all feedbacks from playing. Will stop repeating feedbacks, and call custom stop implementations More...

virtual void	ResetFeedback ()
	Calls this feedback's custom reset More...

virtual void	SetSequence (MMSequence newSequence)
	Use this method to change this feedback's sequence at runtime More...

virtual void	SetDelayBetweenRepeats (float delay)
	Use this method to specify a new delay between repeats at runtime More...

virtual void	SetInitialDelay (float delay)
	Use this method to specify a new initial delay at runtime More...

Detailed Description

This feedback will let you change the color of a target sprite renderer over time, and flip it on X or Y. You can also use it to command one or many MMSpriteRendererShakers.

Member Enumeration Documentation

◆ Modes

enum MoreMountains.Feedbacks.MMFeedbackImage.Modes

sets the inspector color for this feedback

the possible modes for this feedback

Enumerator
OverTime
Instant
ShakerEvent

Member Function Documentation

◆ CustomInitialization()

override void MoreMountains.Feedbacks.MMFeedbackImage.CustomInitialization ( GameObject owner )

protectedvirtual

On init we turn the Image off if needed

Parameters

owner

Reimplemented from MoreMountains.Feedbacks.MMFeedback.

◆ CustomPlayFeedback()

override void MoreMountains.Feedbacks.MMFeedbackImage.CustomPlayFeedback	(	Vector3	position,
		float	feedbacksIntensity = `1.0f`
	)

protectedvirtual

On Play we turn our Image on and start an over time coroutine if needed

Parameters

position
feedbacksIntensity

Implements MoreMountains.Feedbacks.MMFeedback.

◆ CustomStopFeedback()

override void MoreMountains.Feedbacks.MMFeedbackImage.CustomStopFeedback	(	Vector3	position,
		float	feedbacksIntensity = `1`
	)

protectedvirtual

Turns the sprite renderer off on stop

Parameters

position
feedbacksIntensity

Reimplemented from MoreMountains.Feedbacks.MMFeedback.

◆ ImageSequence()

virtual IEnumerator MoreMountains.Feedbacks.MMFeedbackImage.ImageSequence ( )

protectedvirtual

This coroutine will modify the values on the Image

Returns

◆ SetImageValues()

virtual void MoreMountains.Feedbacks.MMFeedbackImage.SetImageValues ( float time )

protectedvirtual

Sets the various values on the sprite renderer on a specified time (between 0 and 1)

Parameters

time

◆ Turn()

virtual void MoreMountains.Feedbacks.MMFeedbackImage.Turn ( bool status )

protectedvirtual

Turns the sprite renderer on or off

Parameters

status

Member Data Documentation

◆ _coroutine

Coroutine MoreMountains.Feedbacks.MMFeedbackImage._coroutine

protected

◆ AllowAdditivePlays

bool MoreMountains.Feedbacks.MMFeedbackImage.AllowAdditivePlays = false

if this is true, calling that feedback will trigger it, even if it's in progress. If it's false, it'll prevent any new Play until the current one is over

◆ BoundImage

Image MoreMountains.Feedbacks.MMFeedbackImage.BoundImage

the Image to affect when playing the feedback

◆ Channel

int MoreMountains.Feedbacks.MMFeedbackImage.Channel = 0

the channel to broadcast on

◆ ColorOverTime

Gradient MoreMountains.Feedbacks.MMFeedbackImage.ColorOverTime

the colors to apply to the Image over time

◆ Duration

float MoreMountains.Feedbacks.MMFeedbackImage.Duration = 0.2f

how long the Image should change over time

◆ EventOriginTransform

Transform MoreMountains.Feedbacks.MMFeedbackImage.EventOriginTransform

the transform to use to broadcast the event as origin point

◆ EventRange

float MoreMountains.Feedbacks.MMFeedbackImage.EventRange = 100f

the range of the event, in units

◆ FeedbackTypeAuthorized

bool MoreMountains.Feedbacks.MMFeedbackImage.FeedbackTypeAuthorized = true

static

a static bool used to disable all feedbacks of this type at once

◆ InstantColor

Color MoreMountains.Feedbacks.MMFeedbackImage.InstantColor

the color to move to in instant mode

◆ Mode

Modes MoreMountains.Feedbacks.MMFeedbackImage.Mode = Modes.OverTime

whether the feedback should affect the Image instantly or over a period of time

◆ ModifyColor

bool MoreMountains.Feedbacks.MMFeedbackImage.ModifyColor = true

whether or not to modify the color of the image

◆ ResetShakerValuesAfterShake

bool MoreMountains.Feedbacks.MMFeedbackImage.ResetShakerValuesAfterShake = true

whether or not to reset shaker values after shake

◆ ResetTargetValuesAfterShake

bool MoreMountains.Feedbacks.MMFeedbackImage.ResetTargetValuesAfterShake = true

whether or not to reset the target's values after shake

◆ StartsOff

bool MoreMountains.Feedbacks.MMFeedbackImage.StartsOff = false

whether or not that Image should be turned off on start

◆ UseRange

bool MoreMountains.Feedbacks.MMFeedbackImage.UseRange = false

whether or not to broadcast a range to only affect certain shakers

Property Documentation

◆ FeedbackDuration

override float? MoreMountains.Feedbacks.MMFeedbackImage.FeedbackDuration

getset

the duration of this feedback is the duration of the Image, or 0 if instant

The documentation for this class was generated from the following file:

Assets/InfiniteRunnerEngine/ThirdParty/MoreMountains/MMFeedbacks/MMFeedbacks/Feedbacks/Legacy/MMFeedbackImage.cs

Public Types

Public Attributes

Static Public Attributes

Protected Member Functions

Protected Attributes

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ Modes

Member Function Documentation

◆ CustomInitialization()

◆ CustomPlayFeedback()

◆ CustomStopFeedback()

◆ ImageSequence()

◆ SetImageValues()

◆ Turn()

Member Data Documentation

◆ _coroutine

◆ AllowAdditivePlays

◆ BoundImage

◆ Channel

◆ ColorOverTime

◆ Duration

◆ EventOriginTransform

◆ EventRange

◆ FeedbackTypeAuthorized

◆ InstantColor

◆ Mode

◆ ModifyColor

◆ ResetShakerValuesAfterShake

◆ ResetTargetValuesAfterShake

◆ StartsOff

◆ UseRange

Property Documentation

◆ FeedbackDuration