Packages

Here are the packages with brief descriptions (if available):

[detail level 1234]

▼NMoreMountains
►NFeedbacks
CBlinkPhase	Describes a blink phase, defined by a duration for the phase, and the time it should remain inactive and active, sequentially For the duration of the phase, the object will be off for OffDuration, then on for OnDuration, then off again for OffDuration, etc If you want a grenade to blink briefly every .2 seconds, for 1 second, these parameters are what you're after : PhaseDuration = 1f; OffDuration = 0.2f; OnDuration = 0.1f;
CDemoBall	A class handling the lifecycle of the balls included in the MMFeedbacks demo It waits for 2 seconds after the spawn of the ball, and destroys it, playing a MMFeedbacks while it does so
CDemoButton	A simple class used to handle demo buttons in the MMF_PlayerDemo and MMFeedbacksDemo scenes
CDemoGhost	A class used on the MMFeedback's demo ghost
CDemoPackageTester	This class, meant to be used in MMFeedbacks demos, will check for requirements, and output an error message if necessary.
CFeedbackHelpAttribute	Atttribute used to mark feedback class. The contents allow you to specify a help text for each feedback
CFeedbackPathAttribute	Atttribute used to mark feedback class. The provided path is used to sort the feedback list displayed in the feedback manager dropdown
CInternalWiggleProperties	A struct used to store internal wiggle properties
CMMAudioFilterDistortionShakeEvent	An event used to trigger vignette shakes
CMMAudioFilterDistortionShaker	Add this to an audio distortion filter to shake its values remapped along a curve
CMMAudioFilterEchoShakeEvent	An event used to trigger vignette shakes
CMMAudioFilterEchoShaker	Add this to an audio echo filter to shake its values remapped along a curve
CMMAudioFilterHighPassShakeEvent	An event used to trigger vignette shakes
CMMAudioFilterHighPassShaker	Add this to an audio high pass filter to shake its values remapped along a curve
CMMAudioFilterLowPassShakeEvent	An event used to trigger vignette shakes
CMMAudioFilterLowPassShaker	Add this to an audio distortion low pass to shake its values remapped along a curve
CMMAudioFilterReverbShakeEvent	An event used to trigger vignette shakes
CMMAudioFilterReverbShaker	Add this to an audio reverb filter to shake its values remapped along a curve
CMMAudioSourcePitchShakeEvent	An event used to trigger vignette shakes
CMMAudioSourcePitchShaker	Add this to an AudioSource to shake its pitch remapped along a curve
CMMAudioSourceSequencer	A MMSequencer with ready made slots to play AudioSources
CMMAudioSourceStereoPanShakeEvent	An event used to trigger vignette shakes
CMMAudioSourceStereoPanShaker	Add this to an AudioSource to shake its stereo pan values remapped along a curve
CMMAudioSourceVolumeShakeEvent	An event used to trigger vignette shakes
CMMAudioSourceVolumeShaker	Add this to an AudioSource to shake its volume remapped along a curve
CMMBlink	Add this class to a GameObject to make it blink, either by enabling/disabling a gameobject, changing its alpha, emission intensity, or a value on a shader)
CMMCameraClippingPlanesShakeEvent	An event used to trigger vignette shakes
CMMCameraClippingPlanesShaker	Add this to a camera and it'll let you control its near and far clipping planes
CMMCameraFieldOfViewShakeEvent	An event used to trigger vignette shakes
CMMCameraFieldOfViewShaker	Add this to a camera and it'll let you control its field of view over time, can be piloted by a MMFeedbackCameraFieldOfView
CMMCameraOrthographicSizeShakeEvent	An event used to trigger vignette shakes
CMMCameraOrthographicSizeShaker	Add this to a camera and it'll let you control its orthographic size over time, can be piloted by a MMFeedbackCameraOrthographicSize
CMMCameraShakeEvent
CMMCameraShakeProperties	Camera shake properties
CMMCameraShaker	A class to add to your camera. It'll listen to MMCameraShakeEvents and will shake your camera accordingly
CMMCameraShakerRotation	A variant of the Camera Shaker that acts on the rotation instead of the position. Careful, can cause vertigo to some users.
CMMCameraShakeStopEvent
CMMCameraZoomEvent
CMMF_Animation	A feedback used to trigger an animation (bool, int, float or trigger) on the associated animator, with or without randomness
CMMF_AudioFilterDistortion	This feedback lets you control the distortion level of a distortion filter. You'll need a MMAudioFilterDistortionShaker on the filter.
CMMF_AudioFilterEcho	This feedback lets you control the wetmix level of an echo filter. You'll need a MMAudioFilterEchoShaker on your filter.
CMMF_AudioFilterHighPass	This feedback lets you control the cutoff frequency of a high pass filter. You'll need a MMAudioFilterHighPassShaker on your filter.
CMMF_AudioFilterLowPass	This feedback lets you control the cutoff frequency of a low pass filter. You'll need a MMAudioFilterLowPassShaker on your filter.
CMMF_AudioFilterReverb	This feedback lets you control the reverb level of a reverb filter. You'll need a MMAudioFilterReverbShaker on your filter.
CMMF_AudioMixerSnapshotTransition	This feedback will let you transition to a target AudioMixer Snapshot over a specified time
CMMF_AudioSource
CMMF_AudioSourcePitch	This feedback lets you control the pitch of an AudioSource over time
CMMF_AudioSourceStereoPan	This feedback lets you control the stereo pan of a target AudioSource over time.
CMMF_AudioSourceVolume	This feedback lets you control the volume of a target AudioSource over time.
CMMF_Blink	This feedback will trigger a MMBlink object, letting you blink something
CMMF_Broadcast	This feedback lets you broadcast a float value to the MMRadio system
CMMF_BroadcastProxy	This component will be automatically added by the MMF_Broadcast feedback
CMMF_Button
CMMF_CameraClippingPlanes	This feedback lets you control a camera's clipping planes over time. You'll need a MMCameraClippingPlanesShaker on your camera.
CMMF_CameraFieldOfView	This feedback lets you control a camera's field of view over time. You'll need a MMCameraFieldOfViewShaker on your camera.
CMMF_CameraOrthographicSize	This feedback lets you control a camera's orthographic size over time. You'll need a MMCameraOrthographicSizeShaker on your camera.
CMMF_CameraShake	This feedback will send a shake event when played
CMMF_CameraZoom	A feedback that will allow you to change the zoom of a (3D) camera when played
CMMF_CanvasGroup	This feedback lets you control the opacity of a canvas group over time
CMMF_CanvasGroupBlocksRaycasts	This feedback will let you turn the BlocksRaycast parameter of a target CanvasGroup on or off on play
CMMF_Collider	This feedback will let you enable/disable/toggle a target collider, or change its trigger status
CMMF_Collider2D	This feedback will let you enable/disable/toggle a target collider 2D, or change its trigger status
CMMF_DebugComment	This feedback doesn't do anything by default, it's just meant as a comment, you can store text in it for future reference, maybe to remember how you setup a particular MMFeedbacks. Optionnally it can also output that comment to the console on Play.
CMMF_DebugLog	This feedback will let you output a message to the console, using a custom MM debug method, or Log, Assertion, Error or Warning logs.
CMMF_DestinationTransform	This feedback will let you animate the position/rotation/scale of a target transform to match the one of a destination transform.
CMMF_Destroy	This feedback allows you to destroy a target gameobject, either via Destroy, DestroyImmediate, or SetActive:False
CMMF_Enable	Turns an object active or inactive at the various stages of the feedback
CMMF_Events	A feedback to bind Unity events to and trigger them when played
CMMF_Fade	This feedback will trigger a one time play on a target FloatController
CMMF_Feedback
CMMF_FeedbackBase
CMMF_FeedbackBaseTarget
CMMF_FeedbackInspector
CMMF_Feedbacks	This feedback allows you to trigger a target MMFeedbacks, or any MMFeedbacks on the specified Channel within a certain range. You'll need an MMFeedbacksShaker on them.
CMMF_Flash	This feedback will trigger a flash event (to be caught by a MMFlash) when played
CMMF_Flicker	This feedback will make the bound renderer flicker for the set duration when played (and restore its initial color when stopped)
CMMF_FloatController	This feedback will trigger a one time play on a target FloatController
CMMF_FloatingText	This feedback will request the spawn of a floating text, usually to signify damage, but not necessarily This requires that a MMFloatingTextSpawner be correctly setup in the scene, otherwise nothing will happen. To do so, create a new empty object, add a MMFloatingTextSpawner to it. Drag (at least) one MMFloatingText prefab into its PooledSimpleMMFloatingText slot. You'll find such prefabs already made in the MMTools/Tools/MMFloatingText/Prefabs folder, but feel free to create your own. Using that feedback will always spawn the same text. While this may be what you want, if you're using the Corgi Engine or TopDown Engine, you'll find dedicated versions directly hooked to the Health component, letting you display damage taken.
CMMF_Fog	This feedback will let you animate the density, color, end and start distance of your scene's fog
CMMF_FreezeFrame	This feedback will trigger a freeze frame event when played, pausing the game for the specified duration (usually short, but not necessarily)
CMMF_Graphic	This feedback will let you change the color of a target Graphic over time.
CMMF_GraphicCrossFade	This feedback will let you trigger cross fades on a target Graphic.
CMMF_HoldingPause	this feedback will "hold", or wait, until all previous feedbacks have been executed, and will then pause the execution of your MMFeedbacks sequence, for the specified duration
CMMF_Image	This feedback will let you change the color of a target sprite renderer over time, and flip it on X or Y. You can also use it to command one or many MMSpriteRendererShakers.
CMMF_ImageAlpha	This feedback will let you change the alpha of a target sprite renderer over time.
CMMF_ImageRaycastTarget	This feedback will let you control the RaycastTarget parameter of a target image, turning it on or off on play
CMMF_InstantiateObject	This feedback will instantiate the associated object (usually a VFX, but not necessarily), optionnally creating an object pool of them for performance
CMMF_Light	This feedback will let you control the color and intensity of a Light when played
CMMF_LoadScene	This feedback will request the load of a new scene, using the method of your choice
CMMF_Looper	This feedback will move the current "head" of an MMFeedbacks sequence back to another feedback above in the list. What feedback the head lands on depends on your settings : you can decide to have it loop at last pause, or at the last LoopStart feedback in the list (or both). Furthermore, you can decide to have it loop multiple times and cause a pause when met.
CMMF_LooperStart	This feedback can act as a pause but also as a start point for your loops. Add a FeedbackLooper below this (and after a few feedbacks) and your MMFeedbacks will loop between both
CMMF_Material
CMMF_MMGameEvent	This feedback will trigger a MMGameEvent of the specified name when played
CMMF_MMSoundManagerAllSoundsControl	A feedback used to control all sounds playing on the MMSoundManager at once. It'll let you pause, play, stop and free (stop and returns the audiosource to the pool) sounds. You will need a MMSoundManager in your scene for this to work.
CMMF_MMSoundManagerSaveLoad	This feedback will let you trigger save, load, and reset on MMSoundManager settings. You will need a MMSoundManager in your scene for this to work.
CMMF_MMSoundManagerSound	This feedback will let you play a sound via the MMSoundManager. You will need a game object in your scene with a MMSoundManager object on it for this to work.
CMMF_MMSoundManagerSoundControl	This feedback will let you control a specific sound (or sounds), targeted by SoundID, which has to match the SoundID of the sound you intially played. You will need a MMSoundManager in your scene for this to work.
CMMF_MMSoundManagerSoundFade	This feedback lets you trigger fades on a specific sound via the MMSoundManager. You will need a MMSoundManager in your scene for this to work.
CMMF_MMSoundManagerTrackControl	This feedback will let you control all sounds playing on a specific track (master, UI, music, sfx), and play, pause, mute, unmute, resume, stop, free them all at once. You will need a MMSoundManager in your scene for this to work.
CMMF_MMSoundManagerTrackFade	This feedback will let you fade all the sounds on a specific track at once. You will need a MMSoundManager in your scene for this to work.
CMMF_Particles	This feedback will play the associated particles system on play, and stop it on stop
CMMF_ParticlesInstantiation	This feedback will instantiate a particle system and play/stop it when playing/stopping the feedback
CMMF_Pause	This feedback will cause a pause when met, preventing any other feedback lower in the sequence to run until it's complete.
CMMF_Player
CMMF_PlayerConfiguration	An asset to store copy information, as well as global feedback settings. It requires that one (and only one) MMFeedbacksConfiguration asset be created and stored in a Resources folder. That's already done when installing MMFeedbacks.
►CMMF_PlayerEditor	A custom editor displaying a foldable list of MMFeedbacks, a dropdown to add more, as well as test buttons to test your feedbacks at runtime
CFeedbackTypePair	A data structure to store types and names
CMMF_PlayerEnabler	A helper class added automatically by MMFeedbacks if they're in AutoPlayOnEnable mode This lets them play again should their parent game object be disabled/enabled
CMMF_PlayerEvent	Events triggered by a MMFeedbacks when playing a series of feedbacks
CMMF_PlayerEvents	A subclass of MMFeedbacks, contains UnityEvents that can be played,
CMMF_Playlist	This feedback will let you pilot a MMPlaylist
CMMF_Position	this feedback will let you animate the position of
CMMF_PPMovingFilter	This feedback will trigger a post processing moving filter event, meant to be caught by a MMPostProcessingMovableFilter object
CMMF_Property	This feedback will let you target (almost) any property, on any object in your scene. It also works on scriptable objects. Drag an object, select a property, and setup your feedback " + to update that property over time
CMMF_RadioSignal	This feedback will let you trigger a play on a target MMRadioSignal (usually used by a MMRadioBroadcaster to emit a value that can then be listened to by MMRadioReceivers. From this feedback you can also specify a duration, timescale and multiplier.
CMMF_RectTransformAnchor	This feedback lets you control the min and max anchors of a RectTransform over time. That's the normalized position in the parent RectTransform that the lower left and upper right corners are anchored to.
CMMF_RectTransformOffset	This feedback lets you control the offset of the lower left corner of the rectangle relative to the lower left anchor, and the offset of the upper right corner of the rectangle relative to the upper right anchor.
CMMF_RectTransformPivot	This feedback lets you control the position of a RectTransform's pivot over time
CMMF_RectTransformSizeDelta	This feedback lets you control the size delta property (the size of this RectTransform relative to the distances between the anchors) of a RectTransform, over time
CMMF_Rigidbody	this feedback will let you apply forces and torques (relative or not) to a Rigidbody
CMMF_Rigidbody2D	this feedback will let you apply forces and torques (relative or not) to a Rigidbody
CMMF_Rotation	This feedback animates the rotation of the specified object when played
CMMF_Scale	This feedback will animate the scale of the target object over time when played
CMMF_SetActive	Turns an object active or inactive at the various stages of the feedback
CMMF_ShaderController	This feedback will let you control values on a target ShaderController, letting you modify the behaviour and aspect of a shader driven material at runtime
CMMF_ShaderGlobal	Turns an object active or inactive at the various stages of the feedback
CMMF_Skybox	This feedback will let you change the scene's skybox on play, replacing it with another one, either a specific one, or one picked at random among multiple skyboxes.
CMMF_Sound
CMMF_SpriteRenderer	This feedback will let you change the color of a target sprite renderer over time, and flip it on X or Y. You can also use it to command one or many MMSpriteRendererShakers.
CMMF_SquashAndStretch	This feedback will let you modify the scale of an object on an axis while the other two axis (or only one) get automatically modified to conserve mass
CMMF_Text	This feedback lets you control the contents of a target Text over time
CMMF_TextColor	This feedback lets you control the color of a target Text over time
CMMF_TextFontSize	This feedback lets you control the font size of a target Text over time
CMMF_TextureOffset	This feedback will let you control the texture offset of a target material over time
CMMF_TextureScale	This feedback will let you control the texture scale of a target material over time
CMMF_TimescaleModifier	This feedback changes the timescale by sending a TimeScale event on play
CMMF_TMPAlpha	This feedback lets you control the alpha of a target TMP over time
CMMF_TMPCharacterSpacing	This feedback lets you control the character spacing of a target TMP over time
CMMF_TMPColor	This feedback lets you control the color of a target TMP over time
CMMF_TMPCountTo	This feedback will let you update a TMP text value over time, with a value going from A to B over time, on a curve
CMMF_TMPDilate	This feedback lets you dilate a TMP text over time
CMMF_TMPFontSize	This feedback lets you control the font size of a target TMP over time
CMMF_TMPLineSpacing	This feedback lets you control the line spacing of a target TMP over time
CMMF_TMPOutlineColor	This feedback lets you control the color of a target TMP's outline over time
CMMF_TMPOutlineWidth	This feedback lets you control the outline width of a target TMP over time
CMMF_TMPParagraphSpacing	This feedback lets you control the paragraph spacing of a target TMP over time
CMMF_TMPSoftness	This feedback lets you tweak the softness of a TMP text over time
CMMF_TMPText	This feedback will let you change the text of a target TMP text component
CMMF_TMPTextReveal	This feedback will let you reveal words, lines, or characters in a target TMP, one at a time
CMMF_TMPWordSpacing	This feedback lets you control the word spacing of a target TMP over time
CMMF_UnloadScene	This feedback lets you unload a scene by name or build index
CMMF_VideoPlayer	This feedback lets you control video players in all sorts of ways (Play, Pause, Toggle, Stop, Prepare, StepForward, StepBackward, SetPlaybackSpeed, SetDirectAudioVolume, SetDirectAudioMute, GoToFrame, ToggleLoop)
CMMF_Wiggle	When played, this feedback will activate the Wiggle method of a MMWiggle object based on the selected settings, wiggling either its position, rotation, scale, or all of these.
CMMFConditionAttribute
CMMFConditionAttributeDrawer
CMMFeedback	A base class, meant to be extended, defining a Feedback. A Feedback is an action triggered by a MMFeedbacks, usually in reaction to the player's input or actions, to help communicate both emotion and legibility, improving game feel. To create a new feedback, extend this class and override its Custom methods, declared at the end of this class. You can look at the many examples for reference.
CMMFeedbackAnimation	A feedback used to trigger an animation (bool, int, float or trigger) on the associated animator, with or without randomness
CMMFeedbackAudioFilterDistortion	This feedback lets you control the distortion level of a distortion filter. You'll need a MMAudioFilterDistortionShaker on the filter.
CMMFeedbackAudioFilterEcho	This feedback lets you control the wetmix level of an echo filter. You'll need a MMAudioFilterEchoShaker on your filter.
CMMFeedbackAudioFilterHighPass	This feedback lets you control the cutoff frequency of a high pass filter. You'll need a MMAudioFilterHighPassShaker on your filter.
CMMFeedbackAudioFilterLowPass	This feedback lets you control the cutoff frequency of a low pass filter. You'll need a MMAudioFilterLowPassShaker on your filter.
CMMFeedbackAudioFilterReverb	This feedback lets you control the reverb level of a reverb filter. You'll need a MMAudioFilterReverbShaker on your filter.
CMMFeedbackAudioMixerSnapshotTransition	This feedback will let you transition to a target AudioMixer Snapshot over a specified time
CMMFeedbackAudioSource
CMMFeedbackAudioSourcePitch	This feedback lets you control the pitch of an AudioSource over time
CMMFeedbackAudioSourceStereoPan	This feedback lets you control the stereo pan of a target AudioSource over time.
CMMFeedbackAudioSourceVolume	This feedback lets you control the volume of a target AudioSource over time.
CMMFeedbackBase
CMMFeedbackBaseTarget
CMMFeedbackBlink	This feedback will trigger a MMBlink object, letting you blink something
CMMFeedbackBroadcast	This feedback lets you broadcast a float value to the MMRadio system
CMMFeedbackCameraClippingPlanes	This feedback lets you control a camera's clipping planes over time. You'll need a MMCameraClippingPlanesShaker on your camera.
CMMFeedbackCameraFieldOfView	This feedback lets you control a camera's field of view over time. You'll need a MMCameraFieldOfViewShaker on your camera.
CMMFeedbackCameraOrthographicSize	This feedback lets you control a camera's orthographic size over time. You'll need a MMCameraOrthographicSizeShaker on your camera.
CMMFeedbackCameraShake	This feedback will send a shake event when played
CMMFeedbackCameraZoom	A feedback that will allow you to change the zoom of a (3D) camera when played
CMMFeedbackCanvasGroup	This feedback lets you control the opacity of a canvas group over time
CMMFeedbackCanvasGroupBlocksRaycasts	This feedback will let you turn the BlocksRaycast parameter of a target CanvasGroup on or off on play
CMMFeedbackCollider	This feedback will let you enable/disable/toggle a target collider, or change its trigger status
CMMFeedbackCollider2D	This feedback will let you enable/disable/toggle a target collider 2D, or change its trigger status
CMMFeedbackDebugComment	This feedback doesn't do anything by default, it's just meant as a comment, you can store text in it for future reference, maybe to remember how you setup a particular MMFeedbacks. Optionnally it can also output that comment to the console on Play.
CMMFeedbackDebugLog	This feedback will let you output a message to the console, using a custom MM debug method, or Log, Assertion, Error or Warning logs.
CMMFeedbackDestinationTransform	This feedback will let you animate the position/rotation/scale of a target transform to match the one of a destination transform.
CMMFeedbackDestroy	This feedback allows you to destroy a target gameobject, either via Destroy, DestroyImmediate, or SetActive:False
CMMFeedbackEnable	Turns an object active or inactive at the various stages of the feedback
CMMFeedbackEvents	A feedback to bind Unity events to and trigger them when played
CMMFeedbackFade	This feedback will trigger a one time play on a target FloatController
CMMFeedbackFeedbacks	Turns an object active or inactive at the various stages of the feedback
CMMFeedbackFlash	This feedback will trigger a flash event (to be caught by a MMFlash) when played
CMMFeedbackFlicker	This feedback will make the bound renderer flicker for the set duration when played (and restore its initial color when stopped)
CMMFeedbackFloatController	This feedback will trigger a one time play on a target FloatController
CMMFeedbackFloatingText	This feedback will request the spawn of a floating text, usually to signify damage, but not necessarily This requires that a MMFloatingTextSpawner be correctly setup in the scene, otherwise nothing will happen. To do so, create a new empty object, add a MMFloatingTextSpawner to it. Drag (at least) one MMFloatingText prefab into its PooledSimpleMMFloatingText slot. You'll find such prefabs already made in the MMTools/Tools/MMFloatingText/Prefabs folder, but feel free to create your own. Using that feedback will always spawn the same text. While this may be what you want, if you're using the Corgi Engine or TopDown Engine, you'll find dedicated versions directly hooked to the Health component, letting you display damage taken.
CMMFeedbackFog	This feedback will let you animate the density, color, end and start distance of your scene's fog
CMMFeedbackFreezeFrame	This feedback will trigger a freeze frame event when played, pausing the game for the specified duration (usually short, but not necessarily)
CMMFeedbackHoldingPause	this feedback will "hold", or wait, until all previous feedbacks have been executed, and will then pause the execution of your MMFeedbacks sequence, for the specified duration
CMMFeedbackImage	This feedback will let you change the color of a target sprite renderer over time, and flip it on X or Y. You can also use it to command one or many MMSpriteRendererShakers.
CMMFeedbackImageAlpha	This feedback will let you change the alpha of a target sprite renderer over time.
CMMFeedbackImageRaycastTarget	This feedback will let you control the RaycastTarget parameter of a target image, turning it on or off on play
CMMFeedbackInstantiateObject	This feedback will instantiate the associated object (usually a VFX, but not necessarily), optionnally creating an object pool of them for performance
CMMFeedbackLight	This feedback will let you control the color and intensity of a Light when played
CMMFeedbackLoadScene	This feedback will request the load of a new scene, using the method of your choice
CMMFeedbackLooper	This feedback will move the current "head" of an MMFeedbacks sequence back to another feedback above in the list. What feedback the head lands on depends on your settings : you can decide to have it loop at last pause, or at the last LoopStart feedback in the list (or both). Furthermore, you can decide to have it loop multiple times and cause a pause when met.
CMMFeedbackLooperStart	This feedback can act as a pause but also as a start point for your loops. Add a FeedbackLooper below this (and after a few feedbacks) and your MMFeedbacks will loop between both
CMMFeedbackMaterial
CMMFeedbackMMGameEvent	This feedback will trigger a MMGameEvent of the specified name when played
CMMFeedbackMMSoundManagerAllSoundsControl	A feedback used to control all sounds playing on the MMSoundManager at once. It'll let you pause, play, stop and free (stop and returns the audiosource to the pool) sounds. You will need a MMSoundManager in your scene for this to work.
CMMFeedbackMMSoundManagerSaveLoad	This feedback will let you trigger save, load, and reset on MMSoundManager settings. You will need a MMSoundManager in your scene for this to work.
CMMFeedbackMMSoundManagerSound	This feedback will let you play a sound via the MMSoundManager. You will need a game object in your scene with a MMSoundManager object on it for this to work.
CMMFeedbackMMSoundManagerSoundControl	This feedback will let you control a specific sound (or sounds), targeted by SoundID, which has to match the SoundID of the sound you intially played. You will need a MMSoundManager in your scene for this to work.
CMMFeedbackMMSoundManagerSoundFade	This feedback lets you trigger fades on a specific sound via the MMSoundManager. You will need a MMSoundManager in your scene for this to work.
CMMFeedbackMMSoundManagerTrackControl	This feedback will let you control all sounds playing on a specific track (master, UI, music, sfx), and play, pause, mute, unmute, resume, stop, free them all at once. You will need a MMSoundManager in your scene for this to work.
CMMFeedbackMMSoundManagerTrackFade	This feedback will let you fade all the sounds on a specific track at once. You will need a MMSoundManager in your scene for this to work.
CMMFeedbackParticles	This feedback will play the associated particles system on play, and stop it on stop
CMMFeedbackParticlesInstantiation	This feedback will instantiate a particle system and play/stop it when playing/stopping the feedback
CMMFeedbackPause	This feedback will cause a pause when met, preventing any other feedback lower in the sequence to run until it's complete.
CMMFeedbackPlaylist	This feedback will let you pilot a MMPlaylist
CMMFeedbackPosition	this feedback will let you animate the position of
CMMFeedbackPPMovingFilter	This feedback will trigger a post processing moving filter event, meant to be caught by a MMPostProcessingMovableFilter object
CMMFeedbackProperty	This feedback will let you target (almost) any property, on any object in your scene. It also works on scriptable objects. Drag an object, select a property, and setup your feedback " + to update that property over time
CMMFeedbackRadioSignal	This feedback will let you trigger a play on a target MMRadioSignal (usually used by a MMRadioBroadcaster to emit a value that can then be listened to by MMRadioReceivers. From this feedback you can also specify a duration, timescale and multiplier.
CMMFeedbackRectTransformAnchor	This feedback lets you control the min and max anchors of a RectTransform over time. That's the normalized position in the parent RectTransform that the lower left and upper right corners are anchored to.
CMMFeedbackRectTransformOffset	This feedback lets you control the offset of the lower left corner of the rectangle relative to the lower left anchor, and the offset of the upper right corner of the rectangle relative to the upper right anchor.
CMMFeedbackRectTransformPivot	This feedback lets you control the position of a RectTransform's pivot over time
CMMFeedbackRectTransformSizeDelta	This feedback lets you control the size delta property (the size of this RectTransform relative to the distances between the anchors) of a RectTransform, over time
CMMFeedbackRigidbody	this feedback will let you apply forces and torques (relative or not) to a Rigidbody
CMMFeedbackRigidbody2D	this feedback will let you apply forces and torques (relative or not) to a Rigidbody
CMMFeedbackRotation	This feedback animates the rotation of the specified object when played
CMMFeedbacks	A collection of MMFeedback, meant to be played altogether. This class provides a custom inspector to add and customize feedbacks, and public methods to trigger them, stop them, etc. You can either use it on its own, or bind it from another class and trigger it from there.
CMMFeedbackScale	This feedback will animate the scale of the target object over time when played
CMMFeedbacksConfiguration	An asset to store copy information, as well as global feedback settings. It requires that one (and only one) MMFeedbacksConfiguration asset be created and stored in a Resources folder. That's already done when installing MMFeedbacks.
►CMMFeedbacksEditor	A custom editor displaying a foldable list of MMFeedbacks, a dropdown to add more, as well as test buttons to test your feedbacks at runtime
CFeedbackTypePair	A data structure to store types and names
CMMFeedbacksEnabler	A helper class added automatically by MMFeedbacks if they're in AutoPlayOnEnable mode This lets them play again should their parent game object be disabled/enabled
CMMFeedbackSetActive	Turns an object active or inactive at the various stages of the feedback
CMMFeedbacksEvent	Events triggered by a MMFeedbacks when playing a series of feedbacks
CMMFeedbacksEvents	A subclass of MMFeedbacks, contains UnityEvents that can be played,
CMMFeedbackShaderController	This feedback will let you control values on a target ShaderController, letting you modify the behaviour and aspect of a shader driven material at runtime
CMMFeedbackShaderGlobal	Turns an object active or inactive at the various stages of the feedback
CMMFeedbacksHelpers
CMMFeedbacksInspectorColors
CMMFeedbackSkybox	This feedback will let you change the scene's skybox on play, replacing it with another one, either a specific one, or one picked at random among multiple skyboxes.
CMMFeedbackSound
CMMFeedbackSpriteRenderer	This feedback will let you change the color of a target sprite renderer over time, and flip it on X or Y. You can also use it to command one or many MMSpriteRendererShakers.
CMMFeedbackSquashAndStretch	This feedback will let you modify the scale of an object on an axis while the other two axis (or only one) get automatically modified to conserve mass
CMMFeedbacksSequencer	A MMSequencer with ready made slots to play MMFeedbacks
CMMFeedbacksShakeEvent
CMMFeedbacksShaker
CMMFeedbackText	This feedback lets you control the contents of a target Text over time
CMMFeedbackTextColor	This feedback lets you control the color of a target Text over time
CMMFeedbackTextFontSize	This feedback lets you control the font size of a target Text over time
CMMFeedbackTextureOffset	This feedback will let you control the texture offset of a target material over time
CMMFeedbackTextureScale	This feedback will let you control the texture scale of a target material over time
CMMFeedbackTimescaleModifier	This feedback changes the timescale by sending a TimeScale event on play
CMMFeedbackTiming	A class collecting delay, cooldown and repeat values, to be used to define the behaviour of each MMFeedback
CMMFeedbackTMPAlpha	This feedback lets you control the alpha of a target TMP over time
CMMFeedbackTMPCharacterSpacing	This feedback lets you control the character spacing of a target TMP over time
CMMFeedbackTMPColor	This feedback lets you control the color of a target TMP over time
CMMFeedbackTMPDilate	This feedback lets you dilate a TMP text over time
CMMFeedbackTMPFontSize	This feedback lets you control the font size of a target TMP over time
CMMFeedbackTMPLineSpacing	This feedback lets you control the line spacing of a target TMP over time
CMMFeedbackTMPOutlineColor	This feedback lets you control the color of a target TMP's outline over time
CMMFeedbackTMPOutlineWidth	This feedback lets you control the outline width of a target TMP over time
CMMFeedbackTMPParagraphSpacing	This feedback lets you control the paragraph spacing of a target TMP over time
CMMFeedbackTMPSoftness	This feedback lets you tweak the softness of a TMP text over time
CMMFeedbackTMPText	This feedback will let you change the text of a target TMP text component
CMMFeedbackTMPTextReveal	This feedback will let you reveal words, lines, or characters in a target TMP, one at a time
CMMFeedbackTMPWordSpacing	This feedback lets you control the word spacing of a target TMP over time
CMMFeedbackUnloadScene	This feedback lets you unload a scene by name or build index
CMMFeedbackVideoPlayer	This feedback lets you control video players in all sorts of ways (Play, Pause, Toggle, Stop, Prepare, StepForward, StepBackward, SetPlaybackSpeed, SetDirectAudioVolume, SetDirectAudioMute, GoToFrame, ToggleLoop)
CMMFeedbackWiggle	When played, this feedback will activate the Wiggle method of a MMWiggle object based on the selected settings, wiggling either its position, rotation, scale, or all of these.
CMMFEnumConditionAttribute
CMMFEnumConditionAttributeDrawer
CMMFHiddenAttribute
CMMFHiddenAttributeDrawer
CMMFHiddenPropertiesAttribute
CMMFInformationAttribute
CMMFInformationAttributeDrawer	This class allows the display of a message box (warning, info, error...) next to a property (before or after)
CMMFInspectorButtonAttribute
CMMFInspectorGroupAttribute	An attribute used to group inspector fields under common dropdowns Implementation inspired by Rodrigo Prinheiro's work, available at https://github.com/RodrigoPrinheiro/unityFoldoutAttribute
CMMFInspectorGroupData
CMMFlash	Add this class to an image and it'll flash when getting a MMFlashEvent
CMMFlashDebugSettings
CMMFlashEvent
CMMFReadOnlyAttribute
CMMFReadOnlyAttributeDrawer
CMMFreezeFrameEvent
CMMInputSequenceRecorder	This class lets you record sequences via input presses
CMMInputSequenceRecorderEditor	Custom editor for sequence recorder
CMMLightShakeEvent
CMMLightShaker	Add this to a light to have it receive MMLightShakeEvents from feedbacks or to shake it locally
CMMMiniObjectPool
CMMMiniObjectPooler
CMMMiniPoolableObject	Add this class to an object that you expect to pool from an objectPooler. Note that these objects can't be destroyed by calling Destroy(), they'll just be set inactive (that's the whole point).
CMMSequence	This scriptable object holds "sequences", data used to record and play events in sequence MMSequences can be played by MMFeedbacks from their Timing section, by Sequencers and potentially other classes
CMMSequenceList	A class used to store sequence notes
CMMSequenceNote	A class describing the contents of a sequence note, basically a timestamp and the ID to play at that timestamp
CMMSequencer	This class lets you design a quantized MMSequence using a sequencer interface, and lets you play a quantized sequence, triggering events on beats if specified
CMMSequencerEditor	Custom editor for MMSequencer, handles recalibration and sequencer display
CMMSequenceTrack	A class describing the properties of a sequence's track : ID, color (for the inspector), Key (for the recorder), State (for the recorder)
CMMShaker
CMMSoundSequencer	A MMSequencer with ready made slots to play sounds
CMMSpriteRendererShakeEvent	An event used (usually from MMFeeedbackSpriteRenderer) to shake the values of a SpriteRenderer
CMMSpriteRendererShaker	Add this to a SpriteRenderer to have it receive MMSpriteRendererShakeEvents from feedbacks or to shake it locally
CMMTimeManager	Put this component in your scene and it'll catch MMFreezeFrameEvents and MMTimeScaleEvents, allowing you to control the flow of time.
CMMTimeScaleEvent
CMMWiggle	Add this class to a GameObject to be able to control its position/rotation/scale individually and periodically, allowing it to "wiggle" (or just move however you want on a periodic basis)
►CMMWiggleEditor
CWiggleEditorProperties
CTimeScaleProperties	The different settings you can play with on a timescale event
CTmpAttribute
CWiggleProperties	A class to store public wiggle properties
►NFeedbacksForThirdParty
CMMAutoFocus	This class will set the depth of field to focus on the set of targets specified in its inspector.
CMMAutoFocus_URP	This class will set the URP depth of field to focus on the set of targets specified in its inspector.
CMMBloomShakeEvent	An event used to trigger vignette shakes
CMMBloomShakeEvent_HDRP	An event used to trigger vignette shakes
CMMBloomShakeEvent_URP	An event used to trigger vignette shakes
CMMBloomShaker	Add this class to a Camera with a bloom post processing and it'll be able to "shake" its values by getting events
CMMBloomShaker_HDRP	Add this class to a Camera with a HDRP bloom post processing and it'll be able to "shake" its values by getting events
CMMBloomShaker_URP	Add this class to a Camera with a URP bloom post processing and it'll be able to "shake" its values by getting events
CMMCameraZoom	This class will allow you to trigger zooms on your camera by sending MMCameraZoomEvents from any other class
CMMChannelMixerShakeEvent_HDRP	An event used to trigger vignette shakes
CMMChannelMixerShakeEvent_URP	An event used to trigger vignette shakes
CMMChannelMixerShaker_HDRP	Add this class to a Camera with a HDRP color adjustments post processing and it'll be able to "shake" its values by getting events
CMMChannelMixerShaker_URP	Add this class to a Camera with a URP color adjustments post processing and it'll be able to "shake" its values by getting events
CMMChromaticAberrationShakeEvent	An event used to trigger vignette shakes
CMMChromaticAberrationShakeEvent_HDRP	An event used to trigger vignette shakes
CMMChromaticAberrationShakeEvent_URP	An event used to trigger vignette shakes
CMMChromaticAberrationShaker	Add this class to a Camera with a chromatic aberration post processing and it'll be able to "shake" its values by getting events
CMMChromaticAberrationShaker_HDRP	Add this class to a Camera with a HDRP chromatic aberration post processing and it'll be able to "shake" its values by getting events
CMMChromaticAberrationShaker_URP	Add this class to a Camera with a URP chromatic aberration post processing and it'll be able to "shake" its values by getting events
CMMCinemachineCameraShaker	Add this component to your Cinemachine Virtual Camera to have it shake when calling its ShakeCamera methods.
CMMCinemachineClippingPlanesShaker	Add this to a Cinemachine virtual camera and it'll let you control its near and far clipping planes
CMMCinemachineFieldOfViewShaker	Add this to a Cinemachine virtual camera and it'll let you control its field of view over time, can be piloted by a MMFeedbackCameraFieldOfView
CMMCinemachineFreeLookZoom	This class will allow you to trigger zooms on your cinemachine camera by sending MMCameraZoomEvents from any other class
CMMCinemachineOrthographicSizeShaker	Add this to a Cinemachine virtual camera and it'll let you control its orthographic size over time, can be piloted by a MMFeedbackCameraOrthographicSize
CMMCinemachinePriorityBrainListener	Add this to a Cinemachine brain and it'll be able to accept custom blend transitions (used with MMFeedbackCinemachineTransition)
CMMCinemachinePriorityEvent	An event used to pilot priorities on cinemachine virtual cameras and brain transitions
CMMCinemachinePriorityListener	Add this to a Cinemachine virtual camera and it'll be able to listen to MMCinemachinePriorityEvent, usually triggered by a MMFeedbackCinemachineTransition
CMMCinemachineZoom	This class will allow you to trigger zooms on your cinemachine camera by sending MMCameraZoomEvents from any other class
CMMColorAdjustmentsShakeEvent_HDRP	An event used to trigger vignette shakes
CMMColorAdjustmentsShakeEvent_URP	An event used to trigger vignette shakes
CMMColorAdjustmentsShaker_HDRP	Add this class to a Camera with a HDRP color adjustments post processing and it'll be able to "shake" its values by getting events
CMMColorAdjustmentsShaker_URP	Add this class to a Camera with a URP color adjustments post processing and it'll be able to "shake" its values by getting events
CMMColorGradingShakeEvent	An event used to trigger vignette shakes
CMMColorGradingShaker	Add this class to a Camera with a color grading post processing and it'll be able to "shake" its values by getting events
CMMDepthOfFieldShakeEvent	An event used to trigger vignette shakes
CMMDepthOfFieldShakeEvent_URP	An event used to trigger vignette shakes
CMMDepthOfFieldShaker	Add this class to a Camera with a depth of field post processing and it'll be able to "shake" its values by getting events
CMMDepthOfFieldShaker_URP	Add this class to a Camera with a URP depth of field post processing and it'll be able to "shake" its values by getting events
CMMExposureShakeEvent_HDRP	An event used to trigger exposure shakes
CMMExposureShaker_HDRP	Add this class to a Camera with a HDRP exposure post processing and it'll be able to "shake" its values by getting events
CMMF_Bloom	This feedback allows you to control bloom intensity and threshold over time. It requires you have in your scene an object with a PostProcessVolume with Bloom active, and a MMBloomShaker component.
CMMF_Bloom_HDRP	This feedback allows you to control bloom intensity and threshold over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMBloomShaker_HDRP component.
CMMF_Bloom_URP	This feedback allows you to control bloom intensity and threshold over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMBloomShaker_URP component.
CMMF_ChannelMixer_HDRP	This feedback allows you to control channel mixer's red, green and blue over time. It requires you have in your scene an object with a Volume with Channel Mixer active, and a MMChannelMixerShaker_HDRP component.
CMMF_ChannelMixer_URP	This feedback allows you to control bloom intensity and threshold over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMBloomShaker_URP component.
CMMF_ChromaticAberration	This feedback allows you to control chromatic aberration intensity over time. It requires you have in your scene an object with a PostProcessVolume with Chromatic Aberration active, and a MMChromaticAberrationShaker component.
CMMF_ChromaticAberration_HDRP	This feedback allows you to control chromatic aberration intensity over time. It requires you have in your scene an object with a Volume with HDRP Chromatic Aberration active, and a MMChromaticAberrationShaker_HDRP component.
CMMF_ChromaticAberration_URP	This feedback allows you to control chromatic aberration intensity over time. It requires you have in your scene an object with a Volume with URP Chromatic Aberration active, and a MMChromaticAberrationShaker_URP component.
CMMF_CinemachineImpulse
CMMF_CinemachineImpulseClear
CMMF_CinemachineImpulseSource
CMMF_CinemachineTransition	This feedback will let you change the priorities of your cameras. It requires a bit of setup : adding a MMCinemachinePriorityListener to your different cameras, with unique Channel values on them. Optionally, you can add a MMCinemachinePriorityBrainListener on your Cinemachine Brain to handle different transition types and durations. Then all you have to do is pick a channel and a new priority on your feedback, and play it. Magic transition!
CMMF_ColorAdjustments_HDRP	This feedback allows you to control color adjustments' post exposure, hue shift, saturation and contrast over time. It requires you have in your scene an object with a Volume with Color Adjustments active, and a MMColorAdjustmentsShaker_HDRP component.
CMMF_ColorAdjustments_URP	This feedback allows you to control color adjustments' post exposure, hue shift, saturation and contrast over time. It requires you have in your scene an object with a Volume with Color Adjustments active, and a MMColorAdjustmentsShaker_URP component.
CMMF_ColorGrading	This feedback allows you to control color grading post exposure, hue shift, saturation and contrast over time. It requires you have in your scene an object with a PostProcessVolume with Color Grading active, and a MMColorGradingShaker component.
CMMF_DepthOfField	This feedback allows you to control depth of field focus distance, aperture and focal length over time. It requires you have in your scene an object with a PostProcessVolume with Depth of Field active, and a MMDepthOfFieldShaker component.
CMMF_DepthOfField_URP	This feedback allows you to control URP depth of field focus distance, aperture and focal length over time. It requires you have in your scene an object with a Volume with Depth of Field active, and a MMDepthOfFieldShaker_URP component.
CMMF_Exposure_HDRP	This feedback allows you to control HDRP exposure intensity over time. It requires you have in your scene an object with a Volume with Exposure active, and a MMExposureShaker_HDRP component.
CMMF_FilmGrain_HDRP	This feedback allows you to control HDRP Film Grain intensity over time. It requires you have in your scene an object with a Volume with Film Grain active, and a MMFilmGrainShaker_HDRP component.
CMMF_FilmGrain_URP	This feedback allows you to control URP Film Grain intensity over time. It requires you have in your scene an object with a Volume with Film Grain active, and a MMFilmGrainShaker_URP component.
CMMF_GlobalPPVolumeAutoBlend	This feedback will let you pilot a Global PostProcessing Volume AutoBlend component. A GPPVAB component is placed on a PostProcessing Volume, and will let you control and blend its weight over time on demand.
CMMF_GlobalPPVolumeAutoBlend_URP	This feedback will let you pilot a Global PostProcessing Volume AutoBlend URP component. A GPPVAB component is placed on a PostProcessing Volume, and will let you control and blend its weight over time on demand.
CMMF_Haptics	Add this feedback to be able to trigger haptic feedbacks via the NiceVibration library. It'll let you create transient or continuous vibrations, play presets or advanced patterns via AHAP files, and stop any vibration at any time This feedback has been deprecated, and is just here to avoid errors in case you were to update from an old version. Use the new haptic feedbacks instead.
CMMF_LensDistortion	This feedback allows you to control lens distortion intensity over time. It requires you have in your scene an object with a PostProcessVolume with Lens Distortion active, and a MMLensDistortionShaker component.
CMMF_LensDistortion_HDRP	This feedback allows you to control HDRP lens distortion intensity over time. It requires you have in your scene an object with a Volume with Lens Distortion active, and a MMLensDistortionShaker_HDRP component.
CMMF_LensDistortion_URP	This feedback allows you to control URP lens distortion intensity over time. It requires you have in your scene an object with a Volume with Lens Distortion active, and a MMLensDistortionShaker_URP component.
CMMF_MotionBlur_HDRP	This feedback allows you to control HDRP motion blur intensity over time. It requires you have in your scene an object with a Volume with MotionBlur active, and a MMMotionBlurShaker_HDRP component.
CMMF_MotionBlur_URP	This feedback allows you to control URP motion blur intensity over time. It requires you have in your scene an object with a Volume with MotionBlur active, and a MMMotionBlurShaker_URP component.
CMMF_NVClip	Add this feedback to play a .haptic clip, optionally randomizing its level and frequency
CMMF_NVContinuous	Add this feedback to play a continuous haptic of the specified amplitude and frequency over a certain duration. This feedback will also let you randomize these, and modulate them over time.
CMMF_NVControl	Add this feedback to interact with haptics at a global level, stopping them all, enabling or disabling them, adjusting their global level or initializing/release the haptic engine
CMMF_NVEmphasis	Use this feedback to play an Emphasis haptics, short haptic bursts whose amplitude and frequency can be controlled in real time, also called Transients in CoreHaptics/iOS
CMMF_NVPreset	Use this feedback to play a preset haptic, limited but super simple predifined haptic patterns
CMMF_PaniniProjection_HDRP	This feedback allows you to control Panini Projection distance and crop to fit over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMPaniniProjectionShaker_HDRP component.
CMMF_PaniniProjection_URP	This feedback allows you to control Panini Projection distance and crop to fit over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMPaniniProjectionShaker_URP component.
CMMF_Vignette	This feedback allows you to control vignette intensity over time. It requires you have in your scene an object with a PostProcessVolume with Vignette active, and a MMVignetteShaker component.
CMMF_Vignette_HDRP	This feedback allows you to control HDRP vignette intensity over time. It requires you have in your scene an object with a Volume with Vignette active, and a MMVignetteShaker_HDRP component.
CMMF_Vignette_URP	This feedback allows you to control URP vignette intensity over time. It requires you have in your scene an object with a Volume with Vignette active, and a MMVignetteShaker_URP component.
CMMF_WhiteBalance_HDRP	This feedback allows you to control white balance temperature and tint over time. It requires you have in your scene an object with a Volume with White Balance active, and a MMWhiteBalanceShaker_HDRP component.
CMMF_WhiteBalance_URP	This feedback allows you to control white balance temperature and tint over time. It requires you have in your scene an object with a Volume with White Balance active, and a MMWhiteBalanceShaker_URP component.
CMMFeedbackBloom	This feedback allows you to control bloom intensity and threshold over time. It requires you have in your scene an object with a PostProcessVolume with Bloom active, and a MMBloomShaker component.
CMMFeedbackBloom_HDRP	This feedback allows you to control bloom intensity and threshold over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMBloomShaker_HDRP component.
CMMFeedbackBloom_URP	This feedback allows you to control bloom intensity and threshold over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMBloomShaker_URP component.
CMMFeedbackChannelMixer_HDRP	This feedback allows you to control channel mixer's red, green and blue over time. It requires you have in your scene an object with a Volume with Channel Mixer active, and a MMChannelMixerShaker_HDRP component.
CMMFeedbackChannelMixer_URP	This feedback allows you to control channel mixer's red, green and blue over time. It requires you have in your scene an object with a Volume with Channel Mixer active, and a MMChannelMixerShaker_URP component.
CMMFeedbackChromaticAberration	This feedback allows you to control chromatic aberration intensity over time. It requires you have in your scene an object with a PostProcessVolume with Chromatic Aberration active, and a MMChromaticAberrationShaker component.
CMMFeedbackChromaticAberration_HDRP	This feedback allows you to control chromatic aberration intensity over time. It requires you have in your scene an object with a Volume with HDRP Chromatic Aberration active, and a MMChromaticAberrationShaker_HDRP component.
CMMFeedbackChromaticAberration_URP	This feedback allows you to control chromatic aberration intensity over time. It requires you have in your scene an object with a Volume with URP Chromatic Aberration active, and a MMChromaticAberrationShaker_URP component.
CMMFeedbackCinemachineImpulse
CMMFeedbackCinemachineImpulseClear
CMMFeedbackCinemachineTransition	This feedback will let you change the priorities of your cameras. It requires a bit of setup : adding a MMCinemachinePriorityListener to your different cameras, with unique Channel values on them. Optionally, you can add a MMCinemachinePriorityBrainListener on your Cinemachine Brain to handle different transition types and durations. Then all you have to do is pick a channel and a new priority on your feedback, and play it. Magic transition!
CMMFeedbackColorAdjustments_HDRP	This feedback allows you to control color adjustments' post exposure, hue shift, saturation and contrast over time. It requires you have in your scene an object with a Volume with Color Adjustments active, and a MMColorAdjustmentsShaker_HDRP component.
CMMFeedbackColorAdjustments_URP	This feedback allows you to control color adjustments' post exposure, hue shift, saturation and contrast over time. It requires you have in your scene an object with a Volume with Color Adjustments active, and a MMColorAdjustmentsShaker_URP component.
CMMFeedbackColorGrading	This feedback allows you to control color grading post exposure, hue shift, saturation and contrast over time. It requires you have in your scene an object with a PostProcessVolume with Color Grading active, and a MMColorGradingShaker component.
CMMFeedbackDepthOfField	This feedback allows you to control depth of field focus distance, aperture and focal length over time. It requires you have in your scene an object with a PostProcessVolume with Depth of Field active, and a MMDepthOfFieldShaker component.
CMMFeedbackDepthOfField_URP	This feedback allows you to control URP depth of field focus distance, aperture and focal length over time. It requires you have in your scene an object with a Volume with Depth of Field active, and a MMDepthOfFieldShaker_URP component.
CMMFeedbackExposure_HDRP	This feedback allows you to control HDRP exposure intensity over time. It requires you have in your scene an object with a Volume with Exposure active, and a MMExposureShaker_HDRP component.
CMMFeedbackFilmGrain_HDRP	This feedback allows you to control HDRP Film Grain intensity over time. It requires you have in your scene an object with a Volume with Film Grain active, and a MMFilmGrainShaker_HDRP component.
CMMFeedbackFilmGrain_URP	This feedback allows you to control URP Film Grain intensity over time. It requires you have in your scene an object with a Volume with Film Grain active, and a MMFilmGrainShaker_URP component.
CMMFeedbackGlobalPPVolumeAutoBlend	This feedback will let you pilot a Global PostProcessing Volume AutoBlend component. A GPPVAB component is placed on a PostProcessing Volume, and will let you control and blend its weight over time on demand.
CMMFeedbackGlobalPPVolumeAutoBlend_URP	This feedback will let you pilot a Global PostProcessing Volume AutoBlend URP component. A GPPVAB component is placed on a PostProcessing Volume, and will let you control and blend its weight over time on demand.
CMMFeedbackHaptics	Add this feedback to be able to trigger haptic feedbacks via the NiceVibration library. It'll let you create transient or continuous vibrations, play presets or advanced patterns via AHAP files, and stop any vibration at any time This feedback has been deprecated, and is just here to avoid errors in case you were to update from an old version. Use the new haptic feedbacks instead.
CMMFeedbackLensDistortion	This feedback allows you to control lens distortion intensity over time. It requires you have in your scene an object with a PostProcessVolume with Lens Distortion active, and a MMLensDistortionShaker component.
CMMFeedbackLensDistortion_HDRP	This feedback allows you to control HDRP lens distortion intensity over time. It requires you have in your scene an object with a Volume with Lens Distortion active, and a MMLensDistortionShaker_HDRP component.
CMMFeedbackLensDistortion_URP	This feedback allows you to control URP lens distortion intensity over time. It requires you have in your scene an object with a Volume with Lens Distortion active, and a MMLensDistortionShaker_URP component.
CMMFeedbackMotionBlur_HDRP	This feedback allows you to control HDRP motion blur intensity over time. It requires you have in your scene an object with a Volume with MotionBlur active, and a MMMotionBlurShaker_HDRP component.
CMMFeedbackMotionBlur_URP	This feedback allows you to control URP motion blur intensity over time. It requires you have in your scene an object with a Volume with MotionBlur active, and a MMMotionBlurShaker_URP component.
CMMFeedbackNVClip	Add this feedback to play a .haptic clip, optionally randomizing its level and frequency
CMMFeedbackNVContinuous	Add this feedback to play a continuous haptic of the specified amplitude and frequency over a certain duration. This feedback will also let you randomize these, and modulate them over time.
CMMFeedbackNVControl	Add this feedback to interact with haptics at a global level, stopping them all, enabling or disabling them, adjusting their global level or initializing/release the haptic engine
CMMFeedbackNVEmphasis	Use this feedback to play an Emphasis haptics, short haptic bursts whose amplitude and frequency can be controlled in real time, also called Transients in CoreHaptics/iOS
CMMFeedbackNVPreset	Use this feedback to play a preset haptic, limited but super simple predifined haptic patterns
CMMFeedbackNVSettings	A class used to store and manage common Nice Vibrations feedback settings
CMMFeedbackPaniniProjection_HDRP	This feedback allows you to control Panini Projection distance and crop to fit over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMPaniniProjectionShaker_HDRP component.
CMMFeedbackPaniniProjection_URP	This feedback allows you to control Panini Projection distance and crop to fit over time. It requires you have in your scene an object with a Volume with Bloom active, and a MMPaniniProjectionShaker_URP component.
CMMFeedbackVignette	This feedback allows you to control vignette intensity over time. It requires you have in your scene an object with a PostProcessVolume with Vignette active, and a MMVignetteShaker component.
CMMFeedbackVignette_HDRP	This feedback allows you to control HDRP vignette intensity over time. It requires you have in your scene an object with a Volume with Vignette active, and a MMVignetteShaker_HDRP component.
CMMFeedbackVignette_URP	This feedback allows you to control URP vignette intensity over time. It requires you have in your scene an object with a Volume with Vignette active, and a MMVignetteShaker_URP component.
CMMFeedbackWhiteBalance_HDRP	This feedback allows you to control white balance temperature and tint over time. It requires you have in your scene an object with a Volume with White Balance active, and a MMWhiteBalanceShaker_HDRP component.
CMMFeedbackWhiteBalance_URP	This feedback allows you to control white balance temperature and tint over time. It requires you have in your scene an object with a Volume with White Balance active, and a MMWhiteBalanceShaker_URP component.
CMMFilmGrainShakeEvent_HDRP	An event used to trigger FilmGrain shakes
CMMFilmGrainShakeEvent_URP	An event used to trigger FilmGrain shakes
CMMFilmGrainShaker_HDRP	Add this class to a Camera with a HDRP FilmGrain post processing and it'll be able to "shake" its values by getting events
CMMFilmGrainShaker_URP	Add this class to a Camera with a URP FilmGrain post processing and it'll be able to "shake" its values by getting events
CMMGlobalPostProcessingVolumeAutoBlend	Use this class to have a global PP volume auto blend its weight on cue, between a start and end values
CMMGlobalPostProcessingVolumeAutoBlend_URP	Use this class to have a global PP volume auto blend its weight on cue, between a start and end values
CMMLensDistortionShakeEvent	An event used to trigger vignette shakes
CMMLensDistortionShakeEvent_HDRP	An event used to trigger vignette shakes
CMMLensDistortionShakeEvent_URP	An event used to trigger vignette shakes
CMMLensDistortionShaker	Add this class to a Camera with a lens distortion post processing and it'll be able to "shake" its values by getting events
CMMLensDistortionShaker_HDRP	Add this class to a Camera with a HDRP lens distortion post processing and it'll be able to "shake" its values by getting events
CMMLensDistortionShaker_URP	Add this class to a Camera with a URP lens distortion post processing and it'll be able to "shake" its values by getting events
CMMMotionBlurShakeEvent_HDRP	An event used to trigger vignette shakes
CMMMotionBlurShakeEvent_URP	An event used to trigger vignette shakes
CMMMotionBlurShaker_HDRP	Add this class to a Camera with a HDRP vignette post processing and it'll be able to "shake" its values by getting events
CMMMotionBlurShaker_URP	Add this class to a Camera with a URP vignette post processing and it'll be able to "shake" its values by getting events
CMMPaniniProjectionShakeEvent_HDRP	An event used to trigger vignette shakes
CMMPaniniProjectionShakeEvent_URP	An event used to trigger vignette shakes
CMMPaniniProjectionShaker_HDRP	Add this class to a Camera with a HDRP vignette post processing and it'll be able to "shake" its values by getting events
CMMPaniniProjectionShaker_URP	Add this class to a Camera with a URP vignette post processing and it'll be able to "shake" its values by getting events
CMMVignetteShakeEvent	An event used to trigger vignette shakes
CMMVignetteShakeEvent_HDRP	An event used to trigger vignette shakes
CMMVignetteShakeEvent_URP	An event used to trigger vignette shakes
CMMVignetteShaker	Add this class to a Camera with a vignette post processing and it'll be able to "shake" its values by getting events
CMMVignetteShaker_HDRP	Add this class to a Camera with a HDRP vignette post processing and it'll be able to "shake" its values by getting events
CMMVignetteShaker_URP	Add this class to a Camera with a URP vignette post processing and it'll be able to "shake" its values by getting events
CMMWhiteBalanceShakeEvent_HDRP	An event used to trigger vignette shakes
CMMWhiteBalanceShakeEvent_URP	An event used to trigger vignette shakes
CMMWhiteBalanceShaker_HDRP	Add this class to a Camera with a white balance post processing and it'll be able to "shake" its values by getting events
CMMWhiteBalanceShaker_URP	Add this class to a Camera with a white balance post processing and it'll be able to "shake" its values by getting events
►NInfiniteRunnerEngine
CAchievementRules	This class describes how the Infinite Runner Engine demo achievements are triggered. It extends the base class MMAchievementRules
CAlbatrossController	The character controller for the main character in the Flight of the Albatross demo scene
CAlbatrossNPC	This class handles the behaviour of the Albatross non player characters in the Flight of the Albatross demo scene
CAlbatrossScenario	The scenario script for the Flight of the Albatross demo scene
CBackgroundMusic	Add this class to a GameObject to have it play a background music when instanciated. Careful : only one background music will be played at a time.
CButtonNavigation	This class allows keyboard navigation (up and down arrows by default) through a set of buttons
CCameraBehavior	Add this class to your main camera to have it zoom in or out, follow the player, etc...
CCameraBehaviorEditor	A custom editor for the Camera Behavior component
CCaveRacer	Controller for the CaveRacer playable character
CCaveRacerSquaddie
CCharacterSelector	Add this component to a button (for example) to be able to store a selected character, and optionally to go to another scene You can see an example of its use in the RetroAdventureCharacterSelection demo scene
CCharacterSelectorManager	Add this class to your scene and it'll store your selected character, for use in the upcoming scene
CCoin	Add this class to an object and it'll add points when collected. Note that you'll need a trigger boxcollider on it
CDistanceSpawner	Spawns and positions/resizes objects based on the distance traveled
CDragon	Extends playable character to implement the specific gameplay of the Dragon level
CExampleScenario
CFlappy	Extends playable character to mimic a gameplay as found in games like Flappy Bird.
CFlappyCloudPenguin	This class handles the penguin "enemies" in the Flappy Cloud demo level. It's pretty specific.
CFreeLeftToRightMovement	Add this class to a character and it'll allow it to move from left to right (or down/up, or back/forward) on the axis of your choice.
CGameManager	The game manager is a persistent singleton that handles points and time
CGameManagerEditor	Game manager editor
CGUIManager	Handles all GUI effects and changes
CHillRider
CInputManager	This persistent singleton handles the inputs and sends commands to the player
CInstructions
CIRESfxEvent
CJumper
CKillsPlayerOnTouch	Add this class to a trigger boxCollider and it'll kill all playable characters that collide with it.
CLaneRunner	This is an example of how you can extend playable character, in this case to have a character that can switch lanes by moving left or right
CLeftRightMove	Extends playable character to implement the specific gameplay of the Dragon level
CLevelManager	Spawns the player, and
CLevelManagerEditor	This class adds names for each LevelMapPathElement next to it on the scene view, for easier setup
CLevelSelector	Add this component to a button so it can be used to go to a level, or restart the current one
CLinkedSpawner	Spawns and positions/resizes objects based on the distance traveled
CMap	This class handles the level selection map. It's pretty specific, you'll probably want to code your own to fit your own level selection needs.
CMapButton	Used for the buttons on the level selection map. As for the map script, pretty specific, you may want to implement your own classes for your level selection.
CMovingObject	Add this class to an object and it'll move according to the level's speed.
COutOfBoundsRecycle	Adds this component to an object and it'll be automatically recycled for further use when it reaches a certain distance after the level bounds
CParallax	Add this class to an object so it'll move in parallax based on the level's speed. Note that this method duplicates the object
CParallaxOffset	Add this class to an object and it'll move in parallax based on the level's speed. This method moves the texture, not the object. It doesn't work for non-2D objects.
CPersistentBackgroundMusic	Add this class to a GameObject to have it play a background music when instanciated. Careful : only one background music will be played at a time.
CPickableObject	Extend this class to make your own pickable objects. Look at Coin.cs for an example. Note that you need a boxcollider or boxcollider2D for this component to work.
CPlayableCharacter	You should extend this class for all your playable characters The asset includes a bunch of examples of how you can do that : Jumper, Flappy, Dragon, etc...
CReactivateOnSpawn
CRepositionOnStart2D	This class repositions a 2D object when enabled if it's at the same x as a platform
CRocket	A rocket controller (the longer you press, the higher you go).
CScenarioEvent	This class describes an item in the scenario.
CScenarioManager	Scenario manager This class is meant to be extended, and its Scenario() method overridden to describe your own level's scenario.
CShadow	Add this class to a 2D agent (player, enemy, item) and it'll "cast" a shadow on a collider
CSkyTheoryGUIManager	Handles all GUI effects and changes
CSkyTheoryLevelManager	Spawns the player, and
CSoundManager	This persistent singleton handles sound playing
CSoundSettings
CSpawner
CSpeedBonus	Add this class to an object and it'll modify the level speed when picked Note that you'll need a trigger boxcollider on it
CSplashScreen	Simple start screen class.
CStartingPosition
CStartScreen	This class handles the start screen. All it does is check for the player pressing the main action button, and if pressed, it loads the specified level
CStickToHill
CSwipeZone
CTimedSpawner	This spawns an object at random intervals within the specified bounds.
CTouchZone	Add this component to a GUI button to have it act as a proxy for a certain action on touch devices. Detects press down, press up, and continuous press. These are really basic mobile/touch controls. I believe that for infinite runners they're sufficient.
CVerticalCharacter
CVerticalScenario	The scenario script for the Flight of the Albatross demo scene
CWatershark	This class handles the behavior of the watershark enemies that appear in the dragon level
CWaterSpeed	This class handles the acceleration of the water's shader speed in the Albatross demo scene
►NMMInterface
CMMCarousel	A class to handle a carousel of UI elements, placed in an HorizontalLayoutGroup. All elements of the carousel need to have the same width.
CMMCheckbox	A class to handle checkboxes
CMMPopup	A component to handle popups, their opening and closing
CMMRadioButton	A class to handle radio buttons. To group them, just use the same RadioButtonGroupName string for all radio buttons in the group
CMMScrollviewButton
CMMSpriteReplace	A class to add to an Image or SpriteRenderer to have it act like a button with a different sprite for on and off states
CMMSpriteReplaceCycle	A class to add to a button so that its sprite cycles through X sprites when pressed
CMMSwitch	A component to handle switches
►NTools
CAIAction	Actions are behaviours and describe what your character is doing. Examples include patrolling, shooting, jumping, etc.
CAIActionPropertyInspector
CAIActionsList
CAIBrain	the AI brain is responsible from going from one state to the other based on the defined transitions. It's basically just a collection of states, and it's where you'll link all the actions, decisions, states and transitions together.
CAIBrainEditor
CAIDecision	Decisions are components that will be evaluated by transitions, every frame, and will return true or false. Examples include time spent in a state, distance to a target, or object detection within an area.
CAIState	A State is a combination of one or more actions, and one or more transitions. An example of a state could be "_patrolling until an enemy gets in range_".
CAITransition	Transitions are a combination of one or more decisions and destination states whether or not these transitions are true or false. An example of a transition could be "_if an enemy gets in range, transition to the Shooting state_".
CAITransitionPropertyInspector
CAITransitionsList
CAxisEvent
CBeat
CFloatController	A class used to control a float in any other class, over time To use it, simply drag a monobehaviour in its target field, pick a control mode (ping pong or random), and tweak the settings
CFloatControllerEditor	Custom editor for the FloatController, conditional hiding and dropdown fill
CFogSettings	A simple class used to store fog properties
CHealthBarEditor	Custom editor for health bars (mostly a switch for prefab based / drawn bars
CIMMSaveLoadManagerMethod	An interface to implement save and load using different methods (binary, json, etc)
CJoystickEvent
CLightController	A class used to control the intensity of a light
CMMAchievement
CMMAchievementChangedEvent
CMMAchievementDisplayer	A class used to display the achievements on screen. The AchievementDisplayItems will be parented to it, so it's better if it has a LayoutGroup (Vertical or Horizontal) too.
CMMAchievementDisplayItem	This class is used to display an achievement. Add it to a prefab containing all the required elements listed below.
CMMAchievementList	A scriptable object containing a list of achievements. You need to create one and store it in a Resources folder for this to work.
CMMAchievementListInspector	Custom inspector for the MMAchievementList scriptable object.
CMMAchievementRules	That class is meant to be extended to implement the achievement rules specific to your game.
CMMAchievementUnlockedEvent	An event type used to broadcast the fact that an achievement has been unlocked
CMMActivationOnStart	Use this class to enable or disable other gameobjects automatically on Start or Awake
CMMAdditiveSceneLoadingManager	A class to load scenes using a loading screen instead of just the default API This is a new version of the classic LoadingSceneManager (now renamed to MMSceneLoadingManager for consistency)
CMMAdditiveSceneLoadingManagerSettings	A simple class used to store additive loading settings
CMMAim
CMMAnimationCurveGenerator	This class will let you create and save a .curves asset in the specified path This asset will include curves (anti or not) from the MMTween library, to use anywhere animation curves are required
CMMAnimationModifier	Add this script to an animation in Mecanim and you'll be able to control its start position and speed
CMMAnimationParameter	A helper class that will hash a animation parameter and update it on demand
►CMMAnimatorMirror	This class will let you mirror the behaviour of an Animator's parameters on a Source Animator onto the ones of a Target Animator. Target will mirror Source. Only the parameters existing on both Target and Source will be considered, you'll need to have the same on both before entering runtime.
CMMAnimatorMirrorBind	Struct used to store bindings
CMMApplicationPlatformActivation	Add this class to a gameobject, and it'll enable/disable it based on platform context, using Application.platform to detect the platform
CMMApplicationQuit	A super simple mono you can add to an object to call its Quit method, which will force the application to quit.
CMMArray	Array helpers
CMMAspectRatioSafeZones	A class to handle the automatic display of safe zones for the different ratios setup in the inspector
CMMAspectRatioSafeZonesEditor	Custom editor for the MMScreenSafeZones component
CMMAudioAnalyzer	This component lets you pick an audio source (either global : the whole scene's audio, a unique source, or the microphone), and will cut it into chunks that you can then use to emit beat events, that other objects can consume and act upon. The sample interval is the frequency at which sound will be analyzed, the amount of spectrum samples will determine the accuracy of the sampling, the window defines the method used to reduce leakage, and the number of bands will determine in how many bands you want to cut the sound. The more bands, the more levers you'll have to play with afterwards. In general, for all of these settings, higher values mean better quality and lower performance. The buffer speed determines how fast buffered band levels readjust.
CMMAudioEvents
CMMAudioListener	A simple component that will ensure (if put on ALL audio listeners in your game) that you never see a "There are two audio listeners in the scene" warning again.
CMMAutoDestroyParticleSystem	Add this class to a ParticleSystem so it auto destroys once it has stopped emitting. Make sure your ParticleSystem isn't looping, otherwise this script will be useless
CMMAutoExecution	This simple class lets you trigger Unity events automatically, on Awake, Enable, Disable, Start, or on instantiate For that last one, you'll want to send a "OnInstantiate" message when instantiating this object
CMMAutoExecutionItem	A data class to store auto execution info to be used in MMAutoExecution
CMMAutoOrderInLayer	Add this component to an object to have it pick a new order in layer on start, useful to have unique sorting layer numbers
CMMAutoRotate	Add this class to a GameObject to make it rotate on itself
CMMAutoRotateEditor	Custom editor for the MMAutoRotate component
CMMBackgroundColorAttribute
CMMBackgroundColorAttributeDrawer
CMMBeatEvent	An event you can listen to that will get automatically triggered for every remapped beat
CMMBezierLineRenderer	Add this class to a line renderer and it'll add control points that let you turn your line into a bezier curve
CMMBillboard	Add this class to an object (usually a sprite) and it'll face the camera at all times
CMMBoundsExtensions	Bounds helpers
CMMCameraAspectRatio	Forces an aspect ratio on a camera
CMMCameraFog	Add this class to a camera (or any object) and it will override fog settings when active
CMMChangeFogColor	Adds this class to a UnityStandardAssets.ImageEffects.GlobalFog to change its color Why this is not native, I don't know.
CMMCinemachineZone	An abstract class that lets you define a zone that, when entered, enables a virtual camera, and takes care of all the boilerplate setup
CMMCinemachineZone2D	2D Implementation of the CinemachineZone abstract class
CMMCinemachineZone3D	3D Implementation of the CinemachineZone abstract class
CMMCleanEmptyFolders	A maintenance class that removes all empty directories from a project via a menu item
CMMCleanupMissingScripts	This class lets you clean all missing scripts on a selection of gameobjects
CMMColorAttribute
CMMColorAttributeDrawer
CMMConditionalActivation	Add this component to a gameobject, and it'll let you enable target monos after all other targets have been disabled
CMMConditionAttribute
CMMConditionAttributeDrawer
►CMMConeOfVision	This class will create a cone of vision defined by an angle and a distance around a point. It will look for targets within that field, and draw a mesh to show the cone of vision initially inspired by this great tutorial by Sebastian Lague : https://www.youtube.com/watch?v=rQG9aUWarwE - check out his tutorials, they're amazing!
CMeshEdgePosition
CRaycastData	A struct to store raycast data
►CMMConeOfVision2D
CMeshEdgePosition
CRaycastData
CMMConeOfVision2DInspector
CMMConeOfVisionInspector
CMMConsole	This class displays an on-screen console for easier debugging DO NOT ADD THIS CLASS AS A COMPONENT. Instead, use the MMDebug.DebugOnScreen methods that will take care of everything
CMMControlsTestInputManager	This persistent singleton handles the inputs and sends commands to the player in the MMControls demo, its sole purpose is to output debug logs of the various interactions with the demo's inputs
CMMCooldown	A class to handle cooldown related properties and their resource consumption over time Remember to initialize it (once) and update it every frame from another class
►CMMCountdown
CMMCountdownFloor	A class to store floor information
CMMCursorVisible	Add this class to an object and it'll make sure that the cursor is either visible or invisible
CMMDButtonPressedEvent	An event fired when a button gets pressed in a MMDebugMenu
CMMDCheckboxFalseEvent
CMMDCheckboxPressedEvent
CMMDCheckboxTrueEvent
CMMDebugController	Add this class to an empty object in your scene and it'll act as a point of control to enable or disable logs and debug draws
CMMDebugEditor	An editor class used to display menu items
CMMDebugLogCommandArgumentCountAttribute	An attribute to add to static methods to they can be called via the MMDebugMenu's command line
CMMDebugLogCommandAttribute	An attribute to add to static methods to they can be called via the MMDebugMenu's command line
CMMDebugMenu	A debug menu helper, meant to help create quick mobile friendly debug menus
CMMDebugMenuButtonEvent	An event used to broadcast button events from a MMDebugMenu
CMMDebugMenuButtonEventListener	A class used to listen to button events from a MMDebugMenu
CMMDebugMenuCheckboxEvent	An event used to broadcast checkbox events from a MMDebugMenu
CMMDebugMenuCheckboxEventListener	A class used to listen to events from a MMDebugMenu's checkbox
CMMDebugMenuChoiceEntry	A class used to store choices contents
CMMDebugMenuCommands	Command lines to be run from the MMDebugMenu To add new ones, add the [MMDebugLogCommand] attribute to any static method
CMMDebugMenuData	A data class used to store the contents of a debug menu
CMMDebugMenuDebugTab	A class used to handle the display of a debug log tab in a MMDebugMenu
CMMDebugMenuItem	A class used to store a menu item
CMMDebugMenuItemButton	A class used to bind a button to a MMDebugMenu
CMMDebugMenuItemCheckbox	A class used to bind a checkbox to a MMDebugMenu
CMMDebugMenuItemChoices	A class used to bind a Choice menu item to a MMDebugMenu
CMMDebugMenuItemList	A class used to store and display a reorderable list of menu items
CMMDebugMenuItemSlider	A class used to bind a slider to a MMDebugMenu
CMMDebugMenuItemText	A class used to bind a text item to a MMDebugMenu
CMMDebugMenuItemTitle	A class used to bind a title item to a MMDebugMenu
CMMDebugMenuItemValue	A class used to bind a value item to a MMDebugMenu
CMMDebugMenuRadioButton	A class to handle radio buttons. To group them, just use the same RadioButtonGroupName string for all radio buttons in the group
CMMDebugMenuSliderEvent	An event used to broadcast slider events from a MMDebugMenu
CMMDebugMenuSliderEventListener	A class used to listen to slider events from a MMDebugMenu
CMMDebugMenuSpriteReplace	A class to add to an image to have it act like a button with a different sprite for on and off states
CMMDebugMenuSwitch	A component to handle switches
CMMDebugMenuTab	A class used to handle the display of a tab in a MMDebugMenu
CMMDebugMenuTabContents	A class used to describe tab contents
CMMDebugMenuTabData
CMMDebugMenuTabManager	A class used to keep track of tabs and their contents in a MMDebugMenu
CMMDebugMenuTestClass	A simple test class used in the MMDebugMenu demo scene to shake a few values and output them in the debug on screen console
CMMDebugOnScreenConsole
CMMDebugTouchDisplay	Add this class to a canvas and it'll automatically reposition TouchPrefabs at the position of touches You can set a higher TouchProvision if your game gets more than the default number (6) simultaneous touches Disable/enable this mono for it to stop/work
CMMDelayParticles	MM delay particles.
CMMDontDestroyOnLoad	Add this component to an object and it'll persist across scenes
CMMDropdownAttribute
CMMDropdownAttributeDrawer
CMMDSliderValueChangedEvent
CMMEnumConditionAttribute	An attribute to conditionnally hide fields based on the current selection in an enum. Usage : [MMEnumCondition("rotationMode", (int)RotationMode.LookAtTarget, (int)RotationMode.RotateToAngles)]
CMMEnumConditionAttributeDrawer
CMMEventListener	A public interface you'll need to implement for each type of event you want to listen to.
CMMEventListenerBase	Event listener basic interface
CMMExecutionOrderAttribute	Add this attribute to a class and its Execution Order will be changed to the value specified in parameters Usage : [ExecutionOrder(66)]
CMMFaceDirection	Use this script to have a Transform automatically face a certain direction, whether its own movement direction, or a specific target Transform
CMMFadeEvent	Events used to trigger faders on or off
CMMFadeInEvent
CMMFadeOutEvent
CMMFader	The Fader class can be put on an Image, and it'll intercept MMFadeEvents and turn itself on or off accordingly.
CMMFaderDirectional	The Fader class can be put on an Image, and it'll intercept MMFadeEvents and turn itself on or off accordingly. This specific fader will move from left to right, right to left, top to bottom or bottom to top
CMMFaderRound	The Fader class can be put on an Image, and it'll intercept MMFadeEvents and turn itself on or off accordingly.
CMMFadeStopEvent	An event used to stop fades
CMMFloatingText	A class used to handle the movement and behaviour of floating texts, usually used to display damage text. This is designed to be spawned by a MMFloatingTextSpawner, not used on its own. It also requires a specific hierarchy. You'll find examples of it in the MMTools/Tools/MMFloatingText/Prefabs folder
CMMFloatingTextMeshPro	A floating text variant using TextMeshPro instead of regular TextMesh
CMMFloatingTextSpawner	This class will let you pool, recycle and spawn floating texts, usually to show damage info. It requires as input a MMFloatingText object.
CMMFloatingTextSpawnEvent	An event used (usually by feedbacks) to trigger the spawn of a new floating text
CMMFollowTarget	Add this component to an object and it'll get moved towards the target at update, with or without interpolation based on your settings
CMMFPSCounter	Add this class to a gameObject with a Text component and it'll feed it the number of FPS in real time.
CMMFPSUnlock	Add this component to any object and it'll set the target frame rate and vsync count. Note that vsync count must be 0 for the target FPS to work.
CMMGameEvent	MMGameEvents are used throughout the game for general game events (game started, game ended, life lost, etc.)
CMMGetFocusOnEnable	Add this bar to an object and link it to a bar (possibly the same object the script is on), and you'll be able to resize the bar object based on a current value, located between a min and max value. See the HealthBar.cs script for a use case
CMMGhostCamera	Add this class to a camera and you'll be able to pilot it using the horizontal/vertical axis, and up/down controls set via its inspector. It's got an activation button, a run button, and an option to slow down time (this will require a MMTimeManager present in the scene)
CMMGridGenerator
CMMGridGeneratorFull	Generates a grid of the specified size, either entirely full or empty
CMMGridGeneratorPath	Generates a grid with a path in the specified direction
CMMGridGeneratorPerlinNoise	Generates a grid of the specified size based on a seeded perlin noise, the smaller the seed, the blockier the grid
CMMGridGeneratorPerlinNoiseGround	Generates a grid with a ground floor
CMMGridGeneratorRandom	Generates a simple grid filled with random points
CMMGridGeneratorRandomWalk	Generates a grid with a path carved by a drunkard walk algorithm See http://pcg.wikidot.com/pcg-algorithm:drunkard-walk
CMMGridGeneratorRandomWalkAvoider	Generates a grid with a path carved by a drunkard walk algorithm that will avoid another grid's walls
CMMGridGeneratorRandomWalkGround	Uses random walk to generate a ground with controlled elevation
CMMGroupSelection	A class used to add a menu item and a shortcut to group objects together under a parent game object
CMMGyroCam	A class used to store gyro properties per camera
CMMGyroParallax	Add this class to a camera rig (an empty object), bind some Cinemachine virtual cameras to it, and they'll move around the specified object as your gyro powered device moves
CMMGyroscope
CMMHealthBar	Add this component to an object and it will show a healthbar above it You can either use a prefab for it, or have the component draw one at the start
CMMHiddenAttribute
CMMHiddenAttributeDrawer
CMMHiddenPropertiesAttribute
CMMImage	Image helpers
CMMInformationAttribute
►CMMInput	Input helpers
CIMButton	IM button, short for InputManager button, a class used to handle button states, whether mobile or actual keys
CMMInputExecution	A simple class used to bind target keys to specific events to trigger when the key is pressed or released
CMMInputExecutionBinding	A class used to store MMInputExecution bindings, associating a target keycode to UnityEvents
CMMInspectorButtonAttribute
CMMInspectorGroupAttribute	An attribute used to group inspector fields under common dropdowns Implementation inspired by Rodrigo Prinheiro's work, available at https://github.com/RodrigoPrinheiro/unityFoldoutAttribute
CMMInspectorGroupData
CMMIStateMachine	Public interface for the state machine.
CMMLayer
CMMLayerPropertyDrawer
CMMLayers
CMMLineRendererCircle
CMMLineRendererDriver	This component, added to a line renderer, will let you fill a list of transforms, and bind their positions to the linerenderer's positions.
CMMLoadScene	Add this component on an object, specify a scene name in its inspector, and call LoadScene() to load the desired scene.
CMMLockInspector	A simple class that lets you lock the current inspector by pressing ctrl (or cmd) + L Pressing the same shortcut again unlocks the
CMMLoot	A class defining the contents of a MMLootTable
CMMLootFloat	a MMLoot implementation for floats
CMMLootGameObject	a MMLoot implementation for gameobjects
CMMLootString	a MMLoot implementation for strings
CMMLootTable	A loot table helper that can be used to randomly pick objects out of a weighted list This design pattern was described in more details by Daniel Cook in 2014 in his blog : https://lostgarden.home.blog/2014/12/08/loot-drop-tables/
CMMLootTableFloat	A MMLootTable implementation for floats
CMMLootTableGameObject	A MMLootTable implementation for GameObjects
CMMLootTableGameObjectSO	A scriptable object containing a MMLootTable definition for game objects
CMMLootTableString	A MMLootTable implementation for strings
CMMMeshToPolygonCollider2D	A class that lets you create polygon collider 2D out of mesh filters
CMMMonoBehaviour
CMMMonoBehaviourDrawer	A generic drawer for all MMMonoBehaviour, handles both the Group and RequiresConstantRepaint attributes
CMMMultipleObjectPooler	This class allows you to have a pool of various objects to pool from.
CMMMultipleObjectPoolerObject	Multiple object pooler object.
CMMObjectBounds
CMMObjectPool
CMMObjectPooler	A base class, meant to be extended depending on the use (simple, multiple object pooler), and used as an interface by the spawners. Still handles common stuff like singleton and initialization on start(). DO NOT add this class to a prefab, nothing would happen. Instead, add SimpleObjectPooler or MultipleObjectPooler.
CMMObservable	This struct lets you declare observable properties. For example, let's say you have a class called Character, and you declare its speed like so :
CMMObservableDemoObserver	A test class used to demonstrate the MMObservable in the MMObservableTest demo scene
CMMObservableDemoObserverAutoSleep	A test class used to demonstrate the MMObservable pattern in the MMObservableDemo scene This one disables itself on Awake, and passively listens for changes, even when disabled
CMMObservableDemoSubject	A test class used to demonstrate how MMObservable works in the MMObservableTest demo scene
CMMOffsetAnimation	Use this class to offset an animation by a random range
CMMOnMouse	Attach this class to a collider and it'll let you trigger events when the user clicks/drags/enters/etc that collider
CMMOpenURL	A class used to open a URL specified in its inspector
CMMOrbitalCamera	A class used to make a camera orbit around a target
CMMPanningTexture	Use this class on a sprite or mesh to have its texture pan according to the specified speed You can also force a sorting layer name
►CMMParallaxUI	Use this class to bind a number of UI layers to the movements of a mouse cursor, or a mobile device gyroscope, or even have it be piloted by another script By setting different speed/amplitude values for each of your UI layers, you'll be able to create a nice parallax effect
CParallaxLayer	A class used to store layer settings
CMMParentingOnStart	This component lets you parent the transform you put it on to any target parent (or to the root if none is set), on Awake, Start or anytime you call its Parent() method
CMMPath	Add this component to an object and you'll be able to define a path, that can then be used by another component
CMMPathMovement	Add this component to an object and it'll be able to move along a path defined from its inspector.
CMMPathMovementElement	This class describes a node on an MMPath
CMMPeriodicExecution	This class will let you trigger a OnRandomInterval event periodically, at random intervals
CMMPersistentHumbleSingleton	Persistent humble singleton, basically a classic singleton but will destroy any other older components of the same type it finds on awake
CMMPersistentSingleton	Persistent singleton.
CMMPlatformActivation	Add this class to a gameobject, and it'll enable/disable it based on platform context, using conditional defintions to do so
CMMPlaylist	Use this class to play audiosources (usually background music but feel free to use that for anything) in sequence, with optional crossfade between songs
CMMPlaylistEditor	A custom editor that displays the current state of a playlist when the game is running
CMMPlaylistPauseEvent
CMMPlaylistPlayEvent	This class stores all the info related to items in a playlist
CMMPlaylistPlayIndexEvent
CMMPlaylistPlayNextEvent
CMMPlaylistPlayPreviousEvent
CMMPlaylistRemote	A class used to pilot a MMPlaylist
CMMPlaylistSong
CMMPlaylistStopEvent
CMMPlotter
CMMPlotterAxis
CMMPlotterEditor	A custom editor displaying a foldable list of MMFeedbacks, a dropdown to add more, as well as test buttons to test your feedbacks at runtime
CMMPlotterGenerator
CMMPoolableObject	Add this class to an object that you expect to pool from an objectPooler. Note that these objects can't be destroyed by calling Destroy(), they'll just be set inactive (that's the whole point).
CMMPositionRecorder	Add this class on a Transform, and it'll record its position periodically The Positions array can then be read from anywhere to know where that object was in the past
CMMPostProcessingMovingFilter
CMMPostProcessingMovingFilterEvent	An event used to move filters on and off a camera
CMMPreventPassingThrough	Prevents fast moving objects from going through colliders by casting a ray backwards after each movement
CMMPreventPassingThrough2D	Prevents fast moving objects from going through colliders by casting a ray backwards after each movement
CMMPreventPassingThrough3D	Prevents fast moving objects from going through colliders by casting a ray backwards after each movement
CMMProgressBar	Add this bar to an object and link it to a bar (possibly the same object the script is on), and you'll be able to resize the bar object based on a current value, located between a min and max value. See the HealthBar.cs script for a use case
CMMProgressBarDemoAuto
CMMProperty
CMMPropertyEmitter	A class used to pick a property, and remap its value for emission/broadcast
CMMPropertyEmitterDrawer
CMMPropertyLink	A class, meant to be extended, used to control a MMProperty and get/set its value
CMMPropertyLinkBool	Bool property setter
CMMPropertyLinkColor	Color property setter
CMMPropertyLinkFloat	Float property setter
CMMPropertyLinkInt	Int property setter
CMMPropertyLinkQuaternion	Quaternion property setter
CMMPropertyLinkString	String property setter
CMMPropertyLinkVector2	Vector2 property setter
CMMPropertyLinkVector3	Vector3 property setter
CMMPropertyLinkVector4
CMMPropertyPicker	A class used to pick a property on a target object / component / scriptable object
CMMPropertyPickerDrawer
CMMPropertyReceiver	A class used to pick a property and modify its value
CMMPropertyReceiverDrawer
CMMPSBToUIConverter
CMMRadialProgressBar	Add this class to a radial image and it'll allow you to control its fill amount This is a legacy class, and it's recommended to use MMProgressBar instead, it'll provide the same functionality (make sure you pick FillAmount as the FillMode) and much more options, such as delayed bars, events, bump, and more!
CMMRadioBroadcaster	A class used to broadcast a level to MMRadioReceiver(s), either directly or via events It can read from pretty much any value on any class
CMMRadioLevelEvent	A struct event used to broadcast the level to channels
CMMRadioReceiver	A class used to receive level values from a MMRadioBroadcaster, and apply it to (almost) any value on any object
CMMRadioSignal	A class used to define a signal, meant to be broadcasted by a MMRadioBroadcaster It'll output a Level value to broadcast, using one time, persistent or driven modes Meant to be extended
CMMRadioSignalAudioAnalyzer	A class used to expose a beat level from a target MMAudioAnalyzer, to be broadcasted by a MMAudioBroadcaster
CMMRadioSignalEditor
CMMRadioSignalGenerator	A class used to generate signals, normalized values between 0 and 1 You can then use these values from a MMRadioBroadcaster, or simply evaluate its value to use wherever you want, like a supercharged animation curve. In that case, simply disable the component, and read from it using its Evaluate method
CMMRadioSignalGeneratorEditor
CMMRadioSignalGeneratorItem	A class used to store generator items and their properties
CMMRadioSignalGeneratorItemList	A reorderable list type used to store generator items
CMMRadioSignalOnValueChange
CMMRagdoller	Use this class to pilot a ragdoll on a character that is usually driven by an animator and have it fall elegantly If you have parts of your ragdoll that you don't want to be affected by this script (a weapon for example), just add a MMRagdollerIgnore component to them
CMMRagdollerIgnore	Add this class to objects you'd like to be unaffected by the MMRagdoller (like weapons for example)
CMMRandomBoundsInstantiator	This class lets you randomly spawn objects within its bounds (defined by a 3D collider)
CMMRandomInstantiator	Add this class to an empty object, bind a few prefabs into its RandomPool slots, and it'll instantiate one of them at its position/rotation on Start or Awake You can also call its InstantiateRandomObject method at any time, and it'll instantiate another random object on demand, potentially destroying the previous one if you decide so
CMMRaycastTarget	Add this class to a UI object to have it act as a raycast target without needing an Image component
CMMReadOnlyAttribute
CMMReadOnlyAttributeDrawer
CMMReadOnlyWhenPlayingAttribute
CMMRendererLayerEditor
CMMRendererSortingLayer
CMMReorderableArray
CMMReorderableAttributeAttribute
CMMReorderableList
CMMRequiresConstantRepaintAttribute
CMMRigidbodyCenterOfMass	Add this class to a Rigidbody or Rigidbody2D to be able to edit its center of mass from the inspector directly
CMMRigidbodyInterface	This class acts as an interface to allow the demo levels to work whether the environment (colliders, rigidbodies) are set as 2D or 3D. If you already know for sure that you're going for a 2D or 3D game, I suggest you replace the use of this class with the appropriate classes.
CMMRuntimeParticleControl	Add this class to a particle system at runtime, and it'll expose controls to play/pause/stop it from the inspector Because Unity's built-in controls somehow lack pause when in play mode
CMMSaveLoadManagerEncrypter	This class implements methods to encrypt and decrypt streams
CMMSaveLoadManagerMethodBinary	This save load method saves and loads files as binary files
CMMSaveLoadManagerMethodBinaryEncrypted	This save load method saves and loads files as encrypted binary files
CMMSaveLoadManagerMethodJson
CMMSaveLoadManagerMethodJsonEncrypted
CMMSaveLoadTester	A simple class used in the MMSaveLoadTestScene to test the MMSaveLoadManager class
CMMSaveLoadTestObject	A test object to store data to test the MMSaveLoadManager class
CMMScene	Scene management helpers
CMMSceneLoadingAntiSpill	This helper class, meant to be used by the MMAdditiveSceneLoadingManager, creates a temporary scene to store objects that might get instantiated, and empties it in the destination scene once loading is complete
CMMSceneLoadingImageProgress	A very simple class, meant to be used within a MMSceneLoading screen, to update the fill amount of an Image based on loading progress
►CMMSceneLoadingManager	A class to load scenes using a loading screen instead of just the default API This class used to be known as LoadingSceneManager, and has now been renamed to MMSceneLoadingManager for consistency
CLoadingSceneEvent
CMMSceneLoadingTextProgress	A very simple class, meant to be used within a MMSceneLoading screen, to update a Text based on loading progress
CMMSceneName	This component, when added on a Text component, will display the name of the level
CMMSceneRestarter	This component lets you restart a scene by pressing a key
CMMSceneViewIcon	Add this class to a gameobject and it'll display its name on the scene view, selected or not.
CMMScreenshot	Add this class to an empty game object in your scene and it'll let you take screenshots (meant to be used in Editor)
CMMScreenshotEditor
CMMSelectionBase	Add this component to an object and it'll always get selection in scene view, even if you select one of its children
CMMSfxEvent	A struct used to trigger sounds
CMMShufflebag	A class to use to get more controlled randomness, taking values out of the bag randomly, and never getting them again
CMMSignal	This class lets you output the value corresponding to one of the basic signal types it contains. Useful to draw basic signal curves.
CMMSimpleObjectPooler	A simple object pool outputting a single type of objects
CMMSingleton	Singleton pattern.
CMMSliderStep	Add this class to a UI slider and it'll let you trigger events when the cursor moves past a certain step
CMMSoundManager	A simple yet powerful sound manager, that will let you play sounds with an event based approach and performance in mind
CMMSoundManagerAllSoundsControlEvent	This event will let you pause/play/stop/free all sounds playing through the MMSoundManager at once
CMMSoundManagerAudioPool	This class manages an object pool of audiosources
CMMSoundManagerEvent	This event will let you trigger a save/load/reset on the MMSoundManager settings
CMMSoundManagerPlayOptions	A class used to store options for MMSoundManager play
CMMSoundManagerSettings	This class stores MMSoundManager settings and lets you tweak them from the MMSoundManagerSettingsSO's inspector
CMMSoundManagerSettingsSO	A class to save sound settings (music on or off, sfx on or off)
CMMSoundManagerSound	A simple struct used to store information about the sounds played by the MMSoundManager
CMMSoundManagerSoundControlEvent	An event used to control a specific sound on the MMSoundManager. You can either search for it by ID, or directly pass an audiosource if you have it
CMMSoundManagerSoundFadeEvent	This event will let you pause
CMMSoundManagerSoundPlayEvent	This event will let you play a sound on the MMSoundManager
CMMSoundManagerTrackEvent	This feedback will let you mute, unmute, play, pause, stop, free or set the volume of a selected track
CMMSoundManagerTrackFadeEvent	This event will let you order the MMSoundManager to fade an entire track's sounds' volume towards the specified FinalVolume
CMMSpawnAroundProperties	This class is used to describe spawn properties, to be used by the MMSpawnAround class. It's meant to be exposed and used by classes that are designed to spawn objects, typically loot systems
CMMSpawnAroundTester	A tester class used to show how the MMSpawnAround class can be used
CMMSpeedTestItem	A struct to store data associated to speed tests
CMMSquashAndStretch	This component will automatically update scale and rotation Put it one level below the top, and have the model one level below that Hierarchy should be as follows :
CMMStateChangeEvent
CMMStateMachine	StateMachine manager, designed with simplicity in mind (as simple as a state machine can be anyway). To use it, you need an enum. For example : public enum CharacterConditions { Normal, ControlledMovement, Frozen, Paused, Dead } Declare it like so : public StateMachine<CharacterConditions> ConditionStateMachine; Initialize it like that : ConditionStateMachine = new StateMachine<CharacterConditions>(); Then from anywhere, all you need to do is update its state when needed, like that for example : ConditionStateMachine.ChangeState(CharacterConditions.Dead); The state machine will store for you its current and previous state, accessible at all times, and will also optionnally trigger events on enter/exit of these states.
CMMStayInPlace	This class forces a transform to stay at a fixed position, rotation and/or scale.
CMMStopMotionAnimation
CMMSwipeEvent	An event usually triggered when a swipe happens. It contains the swipe "base" direction, and detailed information if needed (angle, length, origin and destination
CMMSwipeZone	Add a swipe manager to your scene, and it'll trigger MMSwipeEvents everytime a swipe happens. From its inspector you can determine the minimal length of a swipe. Shorter swipes will be ignored
CMMTilemap	A collection of helper methods for interacting with Tilemaps
CMMTilemapBoolean
CMMTilemapCleaner	A super simple component you can add to a tilemap to get a button to clean it from all tiles
CMMTilemapGenerator	This class will fill a tilemap with the data generated by the combination of its layers
CMMTilemapGeneratorEditor	Custom editor for the MMTilemapGenerator, handles generate button and reorderable layers
►CMMTilemapGeneratorLayer	A class used to store and edit the data of MMTilemapGenerator layers, which you can use and combine to generate unique and random grids
CMMTilemapGeneratorLayerSafeSpot	A struct used to store safe spots dimensions
CMMTilemapGeneratorLayerList	A class used to display a reoderable list of MMTilemapGeneratorLayers
CMMTilemapGridRenderer
CMMTilemapShadow	A class to put on a tilemap so it acts as a shadow/copy of another reference tilemap. Useful for wall shadows for example. Offsetting the tilemap and changing its sorting order etc is done via the regular components
CMMTime	Time helpers
CMMTimedActivation	Add this component to an object and it'll be auto destroyed X seconds after its Start()
CMMTimedDestruction	Add this component to an object and it'll be auto destroyed X seconds after its Start()
CMMToggleActive	This very simple class simply exposes a method to toggle the GameObject it's on (or a target one if left empty in the inspector) active or inactive
CMMTouchAxis	Add this component to a GUI Image to have it act as an axis. Bind pressed down, pressed continually and released actions to it from the inspector Handles mouse and multi touch
CMMTouchButton	Add this component to a GUI Image to have it act as a button. Bind pressed down, pressed continually and released actions to it from the inspector Handles mouse and multi touch
CMMTouchControls
CMMTouchDynamicJoystick	Add this component to a UI rectangle and it'll act as a detection zone for a joystick. Note that this component extends the MMTouchJoystick class so you don't need to add another joystick to it. It's both the detection zone and the stick itself.
CMMTouchJoystick	Joystick input class. In charge of the behaviour of the joystick mobile touch input. Bind its actions from the inspector Handles mouse and multi touch
CMMTouchRepositionableJoystick	Add this component to a UI rectangle and it'll act as a detection zone for a joystick. Note that this component extends the MMTouchJoystick class so you don't need to add another joystick to it. It's both the detection zone and the stick itself.
CMMTrailRendererLayerEditor
CMMTrailRendererSortingLayer
CMMTransformRandomizer	Add this component to an object to randomize its position/rotation/scale on demand or automatically
CMMTransformRandomizerEditor	Custom editor for the MMTransformRandomizer class
CMMTriggerAndCollision
CMMTriggerAndCollisionEditor
CMMTween	The formulas described here are (loosely) based on Robert Penner's easing equations http://robertpenner.com/easing/ I recommend reading this blog post if you're interested in the subject : http://blog.moagrius.com/actionscript/jsas-understanding-easing/
CMMTweenDefinitions
CMMTweenType
CMMTweenTypeDrawer
CMMTwoSidedUI	This class lets you define an axis on which to flip a "two sided" UI element (made of two separate and usually aligned objects, effectively turning each side on/off everytime the container's scale goes above/below a certain threshold
CMMUIFollowMouse
CMMVectorAttribute
CMMVectorLabelsAttributeDrawer
CMMViewportEdgeTeleporter	Add this class to an object and it will automatically teleport to the other end of the screen when reaching the screen's edges
CMMVisibleParticle	Adds this class to particles to force their sorting layer
CMonoAttribute
CMultipleObjectPoolerTester
CObjectBoundsEditor
CPlatformBindings	A class used to store bindings
CProgressEvent
CRagdollBodyPart	A class used to store ragdoll body parts informations
CRatio	A class to store ratio display info
CReorderableDrawer
CSceneViewIconEditor	This class adds names for each LevelMapPathElement next to it on the scene view, for easier setup
CSelectionBase	Add this component to an object and it'll always get selection in scene view, even if you select one of its children
CSerializedMMAchievement	A serializable class used to store an achievement into a save file
CSerializedMMAchievementManager	Serializable MM achievement manager.
CShaderController	A class used to control a float in any other class, over time To use it, simply drag a monobehaviour in its target field, pick a control mode (ping pong or random), and tweak the settings
CShaderControllerEditor	Custom editor for the ShaderController, conditional hiding
CSwipeEvent
CTransformController	A simple class used to control properties on a transform